DS14-XX0 pages
®
EchoPod ® DS14 Ultrasonic Level Switch & Controller
Application
The general purpose ultrasonic level switch provides
continuous level detection up to 49.2” (1.25m) with 4
programmable relays for level switch or level control
functions, and is configured via our free WebCal
software. The embedded level controller can lower
cost by replacing external control hardware. This
non-contact liquid level sensor is ideally suited
for corrosive, sticky or dirty liquids, and is broadly
selected for small day tank, skid, IBC, sump and
process tank level applications.
Features
Success
•t
•t
Configuration is fast and easy via WebCal software
and USB adapter
•t
Narrow 2” beam width and short 2” dead band
optimized for small tanks
•t
Four (4) programmable relays rated @ 1A / 60VA for
switch, pump or valve control and fail-safety
Metal parts are often
Level detection, switch and control functions up to
49.2” (1.25m)
painted in dip tanks
to achieve a clean,
uniform coating. In
this process, suspended parts are
briefly submerged,
and then removed
to rack dry in temperature and humidity controlled
• 1 pump or valve with 3 alarms
• 2 pumps (lead-lag) with 2 alarms
• 2 pumps (duplexing) with 2 alarms
• 4 independent switch point alarms
rooms. Dip tanks are generally 2’ to 4’ deep with level
•t
PVDF transducer and 6P polycarbonate enclosure for
corrosive liquids
wire, 4-20 mA level measurement signal is monitored
•t
Automatic temperature compensation for accurate
measurement
and mixer automation. Here an EchoPod multi-function level sensor controls the fill valve on each tank
with a high and low level alarm. Additionally, the twoby the PLC. An optic level switch is also deployed as
a redundant high level alarm.
Compatible Products
DataLoop™
DataView™
Level Indicator
Commander™
DataPoint™
Multi-Tank Level Controller Level Controller
Level Controller
LI25
LI55
LI90
LC52
© 2010 Flowline Inc. • 10500 Humbolt Street Los Alamitos, CA 90720 • 562.598.3015 • www.flowline.com • DS300220 REV B