Fluid-o-Tech magnetic drive rotary vane pumps0 pages

Fluid-o-Tech magnetic drive rotary vane pumps
TMCF01S TMCF07S AC pump/motor units
TMCF01S
Fluid-o-Tech has combined its expertise in
rotary vane pumps and magnet drives to
exclusively manufacture this series of pumps.
The principle of the magnet drive is the driving
force of the pole-to-pole alignment of two
magnets. The driven magnet is attached
to the pump shaft, while the driving magnet is
attached to the motor shaft and closely located
to the driven magnet.
By means of magnet attraction, the pump
rotates in response to motor shaft rotation.
Available in 6 different displacements, with
either a brass or stainless steel housing, AISI
303 rotor, carbon graphite pumping chamber
and 3/8" GAS or NPT threaded ports, this
pump line may be equipped, upon request,
with standard or balanced built-in relief valve
and NBR, EPDM or Viton® seals.
Compared to conventional coupling, the
magnet drive has several advantages:
1) Longer service life
2) No leaks or contamination
3) Noiseless operation
4) No contact between pump and motor shaft
5) Higher efficency
• Max system pressure: 18 bar (260 psi)
• Max temperature: 70 °C (158 °F)
• Espresso coffee machines
• Soda circulation
• Reverse osmosis
• Solar heating systems
• Cooling systems
• Refrigerating gas transfer
Main applications
251
116 103
125
90
38
2 x 3/8" GAS
2 x 3/8" NPT
22.5
x
x
x-x
145
4 x Ø11
www.fluidotech.it
TMCF07S
22.5
285
x
x
116 103 x-x
125
38
145
90
4 x Ø11
2 x 3/8" GAS
2 x 3/8" NPT
Dimensions in mm Dimensions in mm
®