High temperature ovens XHT0 pages
LJ ttuves Hc3ufE» lernpéTt3ture»
nnnn^^Wl High Ternpprcafure» Ovens
nnnnFRANCE
nnnnGTUVGS
nnnnCONSTRUCTION :
nnnn- Deux volumes : 125 et 343 litres.
nnnn- Le caisson intérieur est en inox, résistant à la corrosion.
nnnn- Le caisson extérieur est en tôle électrozinguée revêtue d'une
nnnnpeinture époxy (RAL7035).
nnnn- Le caisson intérieur est séparé du caisson extérieur par une
nnnnisolation optimale qui réduit les pertes de chaleur et permet une
nnnnmeilleure qualité de chauffe.
nnnn- Les parois et la porte sont isolées par 150 mm de laine de verre
nnnnexcluant toute trace d'amiante. L'isolation assure un fonctionne-
nnnnment optimal, des températures de surface réduites et une excel-
nnnnlente stabilité thermique. L'isolation est améliorée par la pose
nnnnd'un joint spécial permettant l'étanchéité entre la porte et le
nnnncorps de l'étuve.
nnnn- La laine de verre et le joint ne comportent aucune trace d'a-
nnnnmiante.
nnnn- Les charnières sont sur le côté droit et deux attaches robustes
nnnnassurent la fermeture.
nnnnCHAUFFAGE :
nnnnLes éléments chauffants sont des tubes inox blindés, et sont idéa-
nnnnlement placés dans le flux de brassage de l'air intérieur. Les élé-
nnnnments chauffants sont commandés par un relais statique.
nnnnCependant, la qualité de chauffage n'est pas seulement dûe à nos
nnnnéléments chauffants, l'isolation y contribue également. Si l'étuve
nnnnest très bien isolée, la chaleur est conservée à l'intérieur de la
nnnnchambre. Il y a donc le minimum de perte de chaleur, et la
nnnnconsommation électrique est minimale !
nnnnRÉGULATION DE TEMPÉRATURE & SÉCURITÉ :
nnnnLa sonde de régulation est un thermocouple de type J. La tempé-
nnnnrature est régulée par un microprocesseur électronique de grande
nnnnprécision qui empêche un dépassement de la température de
nnnnconsigne. La température de consigne et celle mesurée dans le
nnnnvolume sont affichées en continu sur le régulateur électronique.
nnnnUn second régulateur électronique indépendant, associé à un
nnnnsecond thermocouple, permet de régler une température limite à
nnnnne pas dépasser, fournissant alors une protection de classe 3.1.
nnnnVENTILATION INTÉRIEURE :
nnnnToutes nos étuves haute température sont ventilées. Le flux d'air
nnnnréduit le temps de chauffe et permet la distribution de chaleur
nnnndans le volume. Le ventilateur centrifuge est situé sur le dessus
nnnnde l'étuve et permet d'optimiser l'homogénéisation de l'air dans le
nnnnvolume utile.
nnnnL'air est distribué depuis la turbine vers les éléments chauffants
nnnnet le volume utile.
nnnnL'air chauffé est dirigé vers le bas de l'étuve à travers les parois
nnnnlatérales et est redirigé par le ventilateur.
nnnnRENOUVELLEMENT D'AIR :
nnnnL'entrée d'air frais et l'évacuation de l'air chaud se fait par une
nnnnouverture de diamètre 60 ou 80 mm selon les volumes ; un cla-
nnnnpet de réglage permet d'ajuster le taux de renouvellement d'air.
nnnnEQUIPEMENT :
nnnnLes étuves haute température ont des étagères fixes pour un
nnnnchargement et déchargement pratiques.
nnnn2 étagère sont fournies pour tous les volumes.
nnnnUn passage de 20mm avec bouchon en fibres est situé sur le côté
nnnngauche de l'étuve.
nnnnUn large choix d'options et d'accessoires sont disponibles pour
nnnnrépondre exactement à vos attentes...
nnnnPERFORMANCES :
nnnnLes étuves haute température sont faciles d'utilisation. Elles sont dotées d'équipements
nnnnfonctionnels et pratiques et sont proposées à un prix vraiment raisonnable.
nnnnLes étuves haute température sont fortement ventilées pour garantir une excellente
nnnnprécision et homogénéité de température dans le volume utile.
nnnnDes matériaux d'isolation performants et une forte puissance nominale sont utilisés pour
nnnnune montée en température rapide.
nnnnPourquoi choisir nos étuves haute température XHT ? Montée en température rapide
nnnn- Température maxi. 500°C
nnnn- Stabilité de régulation : inférieure à ±0,2°C
nnnn- Homogénéité dans le volume : inférieure à ±2,5°C à 200°C
nnnnElles conviennent à un grand nombre d'applications : burning, dégazage, pré-chauffage,
nnnndurcissement.....
nnnnPERFORMANCES:
nnnnThe high temperature ovens are easy to use, having both functional and practical equip-
nnnnments, at very reasonable prices compared with furnaces. All high temperature ovens
nnnnare strongly ventilated for the accuracy and homogeneity of temperature in the volume.
nnnnLow thermal mass insulation materials and strong power rating have been used to achie-
nnnnve rapid heating.
nnnnWhy choose our XHT high temperature ovens ? Rapid heating-up
nnnn- Tempetaure up to 500°C
nnnn- Temperature fluctuation: less than ±0,2°C
nnnn- Temperature spatial variation: less than ±2,5°C at 200°C
nnnnThey are suitable for a large number of applications: burning, degassing, pre-heating,
nnnnhardening, hot air sterilization, tests... in many branches of laboratory and industry.
nnnnCONSTRUCTION:
nnnn- Two sizes: 125 and 343 liters.
nnnn- The inner casing is made of corrosion and heating resistant stain-
nnnnless steel.
nnnn- The outer casing is made of sheet steel, finished in a tough stoved
nnnnepoxy paint (white colour RAL7035).
nnnn- No contact between inner and outer casing and an optimised insu-
nnnnlation minimises heat dissipation and allow a best heating quality.
nnnn- The walls and the door are insulated with glasswool, safe for
nnnnusers. The insulation is 150mm thick, ensuring efficient operation,
nnnnlow external temperatures and excellent thermal stability. A special
nnnngasket provides a good seal between the door and the oven body,
nnnnaiding insulation.
nnnn- The insulation and the gasket are asbestos-free.
nnnn- The door is hinged on the right hand side and closed with a 2 ro-
nnnnbusts point fastener.
nnnnHEATING QUALITY:
nnnnThe tubular heating elements are sheathed, made of stainless steel,
nnnnand ideally placed in the air blow. No-wear switching (solid state
nnnnrelay) is used for activating and desactivating the heating elements.
nnnnBut our heating speed is not only done by our heating element. It is
nnnnalso achieved by our insulation. If the oven is well insulated, heat
nnnnwill be kept inside the chamber. Our quality of heating will reduce a
nnnnlot the energy cost!
nnnnTEMPERATURE CONTROL & SAFETY:
nnnnTemperature sensor is a J thermocouple. The temperature is
nnnncontrolled by a precise microprocessor-based controller that provi-
nnnndes a high accuracy and prevents the set temperature from being
nnnnexceeded. The controller digitally displays continuously the set and
nnnnactual values of temperature. An independant second electronic
nnnncontroller, with a second thermocouple, has an adjustable upper
nnnnlimit, giving a class 3.1 protection.
nnnnINTERNAL FAN FOR AIR CIRCULATION:
nnnnAll ovens are fan circulated. The air flow speeds up the heating time
nnnnand also events the temperature distributionwithin the oven. The
nnnncentrifugal blower is located at the top of the oven, shielded from
nnnnthe workspace by a stainless steel baffle.
nnnnAir is draw into the fan from the top in the centre of the oven and
nnnnpasses over the temperature sensor and the sheathed heater ele-
nnnnments.
nnnnThe heated air is distributed in the bottom of the oven through the
nnnnwhole width and then re-circulated by the fan.
nnnnEXHAUST AIR, FRESH AIR SUPPLY:
nnnnThrough access vent, fresh air is provided and pre-heated before
nnnnentering the chamber.
nnnnA 60 or 80 mm diameter exhaust vent is provided with an adjusta-
nnnnble valve to control the exhaust air flow.
nnnnEQUIPMENT:
nnnnFixed shelving for convenient loading / unloading.
nnnn2 shelves are supplied for all models.
nnnnA 20mm diameter access port with fiber cork is fitted as standard in
nnnnthe left-hand wall of the oven.
nnnnA wide range of factory-fitted options and accessories to meet your
nnnnexact requirements...
"