GE
Intelligent Platforms
A10200
AdvancedTCA® Dual Socket Intel® Xeon® Series Processor Single Board Computer
Features
•t Dual sockets support up to two Intel Xeon
5500 or 5600 Series long-life processors
with Intel 5520 chipset
•t NEBS operating environment
•t Intel L5638 (6-core) and L5518 (4-core)
Xeon NEBS processors
•t 6/6 RoHS and WEEE directives compliant;
UL, FCC, and CE Mark registrations
•t CP-TA thermal class B.4 compliant for
lower performance processor complex
configurations
•t Up to 8 DDR3-SDRAM VLP DIMMs
•t PICMG® 3.1, PICMG 3.0 compliant
•t PICMG 3.0, R3.0 assembly, front
panel resources
•t User configurable 1000Base-X or SGMII
compliant Update Channel interface
•t SR-IOV virtualization support in Ethernet
controllers at Zone 2 Fabric, base, and
update channel interfaces
•t Dual, redundant 4 MB BIOS ROMs with
hardware switchover
•t IPMC with local sensors and front access
console port
•t USB, COM, GigEthernet ports
(on front panel)
•t 10/100/1000Base-T Ethernet, USB 2.0,
GPIO, and local SAS HDDs on an RTM
•t Ethernet on RTM supports Wake-on-LAN
•t BIOS, device drivers, initialization
firmware, and optional run-time BIT
•t Linux® 2.6.2x distributions, including
PNE-LE and RHEL; Windows® variants
supported on request
The A10200 processor ATCA board hosts
one or two Intel Xeon 5500 or 5600 Series
processors with 6 or 4 cores per processor.
The processor complex hosts 8 VLP DIMM
DDR3-SDRAM sites (four per processor
socket), and is capable of being configured
with 8 to 64 GB of main memory. The board
provides gigabit Ethernet and 10 Gigabit
Ethernet interfaces to the backplane Base
and Fabric ports, respectively, as defined in
PICMG 3.1.
Front panel resources include four USB
ports, one COM port, one-gigabit Ethernet
maintenance access port, and one IPMC
console port. Standard PICMG mechanical,
supervision, and power conversion
resources are provided on the board
as defined in PICMG 3.0. An accompanying rear transitional module (RTM),
TMS102, provides rear access two
10/100/1000Base-T Ethernet interfaces,
two USB 2.0 interfaces, eight general
purpose I/O, and two on-board SAS hard
disk drives.
The board assembly is defined for
deployment in NEBS office environments. The software package provided
with this board includes standard BIOS,
device driver, and hardware initialization resources required to support both
Linux and on-request Windows OS
environments. An optional run-time BIT
application package is also available.
The A10200 is targeted for core and edge
network systems applications requiring
a general-purpose processor board with
high real-time and memory capacity.