SRB - Lockbolt setting tools0 pages
Pin
Collar
Break Point
Lock bolt after installation
Pintail
Lockbolt pre installation
TAURUS® 3 SRB
The lockbolt setting
tool especially for
lockbolt 4.8 mm
Working range
4.8 and 6.4 lockbolts C6L®* and MagnaGrip®*
Head
TAURUS® 5 compact
The lockbolt setting
tool for lockbolts 4.8 mm
and 6.4 mm
GESIPA® lockbolt setting tools
Working range
4.8 lockbolts MagnaGrip®* and C6L®*
Technical data
Weight:
Operating air pressure:
Air hose connection Ø:
Air consumption:
Traction power:
Stroke:
Technical data
Weight:
Operating air pressure:
Air hose connection Ø:
Air consumption:
Traction power:
Stroke:
2,8 kg
5 - 7 bar
6 mm
4,8 NL / stroke
26,000 N at 5 bar
14 mm
Accessories
Maintenance wrench SW12/14, SW14/17
1 hydraulic oil bottle 100 ml
1 oil rell can
Operating instructions with spare parts list
Accessories
Maintenance wrench SW12/14, SW14/17
1 hydraulic oil bottle 100 ml
1 oil rell can
Operating instructions with spare parts list
Fastening material by means of lockbolts
With standard lockbolts, the setting process itself
is very similar to the blind riveting process.
3. By pulling the pin the joints are pressed together and
the collar is fed into the grooves of the pin.
1. The pin is positioned on one side and the collar
on the other side of the material to be joined.
4. The joining process is nished once the pin breaks
off at the predetermined break load. The break load
is achieved by the clamping of the joined materials.
2. The setting tool grasps the pin while supporting
itself against the collar.
2.0 kg
5 - 7 bar
6 mm
4.8 NL / stroke
14,000 N at 5 bar
25 mm
Advantages
• Specially adjusted stroke for setting lockbolts
• Very high tensile strength allows fast setting
• Extremely handy and lightweight due to its
compact design
• Economic consumption of compressed air
• Improved jaw life with specially designed pulling
head assemblies
• Efcient operation through extraction of spent mandrels
• Large spent mandrel container
• Attractive price performance ratio
TAURUS® 5 compact for lockbolts 4.8mm C6L®*
Part no. 760 0003
TAURUS® 5 compact for lockbolts 4.8mm MagnaGrip®*
Part no. 760 0004
TAURUS® 5 compact for lockbolts 6.4mm C6L®*
Part no. 760 0005
TAURUS® 5 compact for lockbolts 6.4mm MagnaGrip®*
Part no. 760 0006
* Some registered trademarks of the companies TITGEMEYER GmbH & Co. KG
and Alcoa Fastening Systems
Advantages
• good accessibility by narrow nosepiece and
little device head
• adapted tensile strength allows efcent setting
• Economic consumption of compressed air
• Improved jaw life with specially designed
pulling head assemblies
• Efcient operation through extraction of spent
mandrels
• removeable spent mandrel container
• Attractive price performance ratio
TAURUS® 3 for lockbolts 4.8mm MagnaGrip®*
Part no. 758 0037
TAURUS® 3 for lockbolts 4.8mm C6L®*
Part no. 758 0038
* Some registered trademarks of the companies TITGEMEYER GmbH & Co. KG
and Alcoa Fastening Systems