id1530 pages
RFID- Identification system
ID153
Modular Explosion protection
Mounting in Ex Area Zone 1, Zone 2
Characteristics
Modular and compact system, direct
mounting inside hazardous area
• Customizable by integration of different card reader
types / systems
EC- Examination certificate
• TÜV 01 ATEX 1720 X
Ex- protection
• II 2 G; EEx q II T4
Multiple standardized card reader types
• Trovan, Mifare, Legic, Hitag, etc.
Multiple interfaces
• USB, RS232, RS485, RS422, custom types
• Potential free relay contact output
Simple connection in Ex Zone
• Interface free Ex e connection
Custumized housings with high
protection level
• Stainless steel, IP65/66
Built in LEDs for local feedback
• Multiple LEDs for direct operation feedback
(if supported by card reader HW)
Description
The ID153 Identification System, for stand-alone use or for
use in combination with Ex-PC100 system is developed for
direct installation in hazardous area Zone 1 and 2.
The ID153 can be delivered with different Hardware reader
platforms, supporting different protocols, like TROVAN, MIFARE, LEGIC, HITAG etc.
The ID153 is designed as a RFID system, for contactless
reading of transponder tags and cards.
The tag or card data will directly be transmitted to a central
controller e.g. for time stamping or operator access or they
can be forwarded to supervisory control systems.
In combination with a PC100 Ex PC or operator station, the
ID153 offers the opportunity to upgrade it with an effective
operator access control in hazardous area.
In combination with an electrical door opener, the ID153 can
be used for a simple physical access control for rooms or
buildings. For this application, it can also be delivered with
high current potential free relay contact outputs.
The ID153 can be connected to the PC100 control systems or
door opener system, using the existing Ex e terminal room.
The waving of intrinsically safe connections makes additional
interfaces and the verification of Ex i loops unnecessary.
Technical Data
Identification system ID153
General
Ex Area, Zone 1 and 2
Ex- protection
II 2 G, EEx q II T4
Ambient temperature
Housing
Mounting
-20°C ...+60°C
Dimensions
H x W x D: 136 mm x 100 mm x 37 mm (ID153 module type 0)
H x W x D: 150 mm x 89 mm x 37 mm (ID153 module type 1)
H x W x D: 220 mm x 120 mm x 55 mm (Stainless steel housing)
Protection level
Module type x: IP40, complete housing: IP65 (IP66 on demand)
Material
Stainless steel V2A, (V4A on demand)
Reader -
Reading distance
Specification
Interface
1-5 cm (depending on Reader-HW)
USB, RS232, RS485, RS422, custom types
Relay output