Digital Small Tool Microscope

Sinpa

Characteristics

© Goniometer eyepiece is equipped with main eyepiece used to

aim and small eyepiece used to read angle. It has wide

measurement application, mainly used to measure angle, thread

and alignment of coordinated measurement.

© Main microscope can deflect left and right, suitable for the

measurement of spiral parts.

© It provides various eyepieces and objectives to get a clear image

and large view field.

© Adopts photoelectric display technology and takes precision

grating scale as measuring units for X and Y axis. Thus realize

direct reading and convenient measurement.

© The worktable can move rapidly or do fine movement. It can rotate

by rotating hand wheel to measure angle conveniently; The

worktable is equipped with center cradle for the measurement of

shaft parts.

Technical Parameters

Range of measurement(mm)

X coordinate: 0 ~ 100mm

Y coordinate: 0 ~ 50mm

Resolution for X and Y coordinate: 0.001 mm

Accuracy of the instrument: (2+L/50) u m, of which, L = measured

length ( unit: mm)

Worktable:

Diameter of the circular worktable: 115mm

Microscope upright column

Moving range of Z direction for microscope: 90mm

Deflection angle: ±10°

Goniometric eyepiece

Angular calibrated range: 0° ~ 360°

Angular calibrated value: V

Template eyepiece

Calibrated range of the template eyepiece: ± 7°

Angular calibrated value of the template eyepiece: 10'

Tailstock rack:

Maximum clamping diameter: d>70mm

Maximum clamping length: 190mm

Optical detector:

Maximum depth of measured hole for more than 5 mm ,15mm

Measuring pressure 0.1N

Stability of measurement 0.001 mm

Objective

Working distance and diameter of view field with

double-image eyepiece

The error of composing image for double image < 0.001mm

Ambient environment of the instrument service

Room temperature: 20°C ± 3°C

Relative humidity: Not more than 60%

Overall sizes of the instrument (mm): 600 x 350 x 530

Mainframe weight: 46kg