Complete topping up equipment0 pages
A5.2
Complete topping-up equipment
for Alcad Ni-Cd batteries
Alcad’s complete topping-up equipment consists of a filling pistol
“cell topper” and a water containment unit connected by a flexible hose.
The filling pistol, which has a flow rate of 8 litres/min., shuts off at the
correct level when the appropriate spacer tube is used.
Designed to simplify the water replenishment procedure for large sizes or
numbers of cells, the equipment is effective especially where the electrolyte
levels cannot be seen easily.
1
Safety precautions
ᔡ
Remove all rings, watches, and
other items with metal parts prior
to working with battery.
2
ᔡ
Wear protective gear, rubber
gloves, long sleeves, closed
goggles or shield.
ᔡ
Never allow an exposed flame or
spark near the battery.
3
4
ᔡ
Never smoke while performing
any operation on the battery.
ᔡ
Discharge any possible static
electricity from clothing and/or
tools by touching an earthconnected part “ground” prior to
working with the battery.
ᔡ
Electrolyte is harmful to skin and
eyes. In the event of contact with
skin and eyes, wash immediately
with plenty of water.
6
7
Use insulated tools.
ᔡ
5
If eyes are affected, flush with
water, and obtain immediate
medical attention.
1 Easy to manoeuvre:
handles like a hand truck
2 Easy to use:
instructions displayed directly on the unit
3 Easy to fill:
large opening
4 Dependable water source
5 On/off switch:
located on the rear of the unit
6 Output hose
7 Sealed cell battery is included