DC Radio Crane Control0 pages
Hubbell Industrial Controls, Inc.
DC Radio Crane Control
31.100 SSR
Solid State Relay Output Card
Catalog 31100 SSR • August 2004 • New
Features
•
(2) Solid state outputs rated 270 VDC.
•
No interface relays are needed for
controllers up to and including NEMA
size 5 contactors
•
1.8 amps continuous rating / 4.75 amps
for 0.25 seconds
•
Each output circuit protected with a 3
amp fuse
•
Status LED's: red = output activated;
green = output current flowing.
•
Up to (10) SSR output cards (20 circuits)
can be provided per motherboard card
rack.
SSR Output Card
•
Opto-isolated feedback sensing of the motor controller M, F/R or H/L contactor coil operating currents
monitors the status of the SSR condition. During operation, or upon start-up, if the SSR output in any of
the monitored circuits is detected to be shorted, or open, the radio receiver will shut down the motor
controller.
•
Additional SSR modules can be optionally configured to monitor an unused auxiliary contact mounted on
the motor controller M, F/R or H/L contactors to provide positive indication the contactor has picked up
when commanded.
250V DC Output Section
Dual solid state relay PC boards in 10-slot card cage allowing
for up to 20 outputs (WBA 4493).
Type .................................... Oscillator driven transformer coupled
Indicators ............................. Red: Output activated, Green: output
on (15 ma main. Current flowing in
output circuit).
Output Voltage ..................... 150-300V dc
Reverse Polarity Protection... 2kV transient voltage protected, 40 µJ
Input Voltage ........................ 4.5-6.5V dc, active high
Load ..................................... 1.8A, 250V dc, inductive
Arc Suppression ................... 700V (built-in), 40J
Isolation ............................... 4000V
Feedback Sensing ................Opto-isolated input from: MAIN
CONTACTOR;
UP,
DOWN,
FORWARD, REVERSE
Temperature Range ............. -22°F to 158°F (-30°C to 70°C)
(2) Motherboard card racks with (16) SSR Cards shown
Hubbell Industrial Controls
a subsidiary of Hubbell Incorporated
4301 Cheyenne Drive, Archdale NC 27263
Telephone (336) 434-2800 • FAX (336) 434-2803
http://www.hubbell-icd.com
Sales@hubbell-icd.com