Hack-saw0 pages

HR

TECHNICAL SHEET
HACK-SAW
PRODUCER: „HUBIX"

CHARACTERISTICS
Insulation, red, made of polyamide with the 30% addition fibreglass. Two blade position. Blade has a
cover. Tool is controlled and tested (10kV/10s) in accordance with EN 60900:2004.
Blade length: 300mm
Weight: 730g

APPLICATION
Live working up to 1000V a.c. and 1500V d.c. Tool is used to cutting constructional elements of
electric devices on overhead lines and connecting boxes..

STORAGE AND MAINTENANCE
Insulated or insulating hand tools should be properly stored to minimize the risk of damage to the
insulation due to storage or transportation. These tools should be stored generally separated from
other tools to avoid mechanical damage or confusion. Tool should be prevented from excessive heat
and sun light. Use a dry tissue to clean. When tool becomes strong soiled use suitable solvent to
clean.

CHECK AND PERIODIC INSPECTION
Before use, each hand tool should be visually inspected by the user. An annual visual examination by
a suitably trained person is recommended to determine the suitability of the tool for further service.
The visual check shall be considered successful if:
o The tool (in particular the insulation) is free from external defect,
o The marking is legible and complete.
Don’t use damaged, worn-out (cracks or deep scratches on insulation) or dirty tools in live working.
Tool which becomes wet must be dried before use