TMRN2 Active Headspace Dehydrator + Nitrogen Generator0 pages

HY-PRO FILTRATION

TMRN2 - Active Headspace Dehydrator + Nitrogen Generator

TMRN2 Benefits
Reduce & Maintain H2O to < 200 ppm
Nitrogen barrier at oil - air interface
Prevents airborne water, particulate &
metal ions from entering the reservoir
Removes combustible dissolved gases
Reduces oxidation & fluid breakdown
catalysts yielding extended fluid life
Equilibrium (Oil and Headspace Air)

How TMRN2 Works (see illustration below)

Nitrogen is an inert gas so it will also remove
combustible gases (ie CO2, C2H2, CO, C2H4, C2H6,
CH4, H2) from the oil to reduce oxidation and fluid
breakdown.

A precision orifice on the TMRN2 outlet controls the N2
flow into the reservoir headspace. The connection is made
to the reservoir headspace above the maximum fluid level
opposite the breather location. N2 is introduced into the
headspace at 1~2 psi and sweeps across the oil air
interface.

TMRN2 is an active breather system that maintains
the air in the headspace that continuously introduces
clean dry Nitrogen. As the dry N2 transfers through
the headspace at RH < 1% the oil gives up its water
striving to achieve equilibrium with the dry Nitrogen in
the headspace.

Compressed air (100psi - 220psi) is connected to the
TMRN2 regulator inlet. The air passes through particulate
and water removal filters then through a membrane that
separates the N2 from the air. TMRN2 under normal
operating conditions will generate 98% N2 on the outlet.

The extremely clean and dry N2 (-90°F to -150°F dew point)
fills the reservoir headspace with a continuous supply of N2.
The N2 slowly passes through headspace exiting through
the breather removing water and dissolved gases that are
released by the oil into the N2.

www.hyprofiltration.com