T20 - Plate heat exchanger0 pages
T20
T20-BFG
Plate heat exchanger
Applications
General heating and cooling duties.
Standard design
The plate heat exchanger consists of a pack of corrugated
metal plates with portholes for the passage of the two fluids
between which heat transfer will take place.
The plate pack is assembled between a fix frame plate and a
movable pressure plate and compressed by tightening bolts.
The plates are fitted with a gasket, which seals the interplate
channel and directs the fluids into alternate channels.
The number of plates is determined by the flow rate, physical
properties of the fluids, pressure drop and temperature
program. The plate corrugations promote fluid turbulence and
support the plates against differential pressure.
The frame plate and the pressure plate are suspended from
an upper carrying bar and located by a lower guiding bar,
both of which are fixed to a support column.
Connections are located in the frame plate or, if either or both
fluids make more than a single pass within the unit, in the
frame and pressure plates.
Typical capacities
Liquid flow rate
Up to 225 kg/s (3600 gpm), depending on media, permitted
pressure drop and temperature program.
Plate types
T20B and T20M plates
Frame types
FM, FG and FS
Working principle
Channels are formed between the plates and the corner ports
are arranged so that the two media flow through alternate
channels. The heat is transferred through the plate between
the channels, and complete counter-current flow is created
for highest possible efficiency. The corrugation of the plates
provides the passage between the plates, supports each
plate against the adjacent one and enhances the turbulence,
resulting in efficient heat transfer.
Flow principle of a plate heat exchanger