ILT AirFiltrationTechnologies.

Air Purifier UNIFIL 1MRV20-0.75 UNIFILή 1MLV20-0.75

Collection Efficiency of Mainfilter 99.997% for contaminants > 0.3 m according to DIN 24184 99.95% for contaminants in MPPS according to EN 1822 (MPPS = Most penetrating particle size) Data Sheet 06UNI010200-1 05.08 EN-A.DOC Cabinet material: 1.5 mm industrial-grade sheet steel DC01 AmEN 10130/10131 (St 12-03), reinforced, powder coated, leak proof for condensates, sump for precipitated liquids with drain connection for siphon 1" Maintenance Opening filter module/prefilter cell: one maintenance door with two double-bit locks mainfilter cell: cover with 6 star grip screws Direction of Air Flow Օ horizontally on the crude gas side vertically on the clean gas side (with optional equipment, the direction can be adjusted individually) Airtechnical Connection Օ on the crude gas side with intake plate (accessory) with every desired di-ameter (recommended: 200 mm) for pipe/hose connection ؕ on the clean gas side: blowing freely Electrotechnical Connection with on-site line disconnector or separate Filter Monitor (accessory) Motor Performance, Operational Voltage 0.75 kW, 400 VAC, 50 Hz (special voltages possible on request) Dimensions see technical drawing overleaf showing a unit in standard design Space Requirements, Clearances >

This unit is usually installed on a pedestal adjacent to the emission source (e.g. a machine tool). Alternatively, this precipitator can be mounted onto existing peripheral devices (e. g. swarf conveyors).

ca. 800 mm in front of maintenance door for maintenance purposes Օ above clean gas exit: ca. 0.5 m blast section (data may vary depending on unit type and accessories employed) Weight >

has been designed for constant operation (24/7) and does not need recovery cycles. The unit can be connected to ma-
chines/emission sources with ductwork or hoses. Special solutions as well as customized connection types are possible without problems quickly and cost-effectively.

ca. 120 kgs Operating Noise ca. 72 dB(A), measured in 1 m distance/height, free field condition Operating Conditions -25 to+40ְ C ambient temperature, installation in workshop halls The unit complies with these Standards Type Designation DIN EN 292, DIN EN 60204-1, 89/392/EWG, 91/368/EWG, 93/44/EWG, 73/23/EWG, 89/336/EWG, 92/31/EWG, 93/68/EWG UNIFIL 1MRV20-0.75 UNIFIL 1MLV20-0.75 Recommended Accessory Range of Application air intake connector with regulating valve (for connection to emission source/machine) Օ separate line disconnector in surface-type casing drain siphon 1Փ precipitation of aerosols, crude gas not flammable or ignitable (flashpoint 120 C) Function Principle Optional Accessory filtering precipitation (mechanically) (In extracts, only exemplary. Every accessory can be supplied on request:) pedestals, mounting frames, pipes/ductwork, hoses, outlet plenums . . . Ventilator Performance Unit Alternatives blowing freely 1,500 mг/h mirror design: maintenance door on the unitՒs opposite side (standard version: maintenance door on the right of airflow) cabinet of stainless steel (V2A) Օ individual special designs on request Suction Performance adjustable (with intake plate), max. 1,200 m/h Filter Sections, Filter Elements Scope of Delivery 2 filter sections in 1 filter module in 1 unit, filter elements in total: frame with Aluminium wire mesh, 5 layers, reusable, 1 piece frame with Aluminium wire mesh, 13 layers, reusable, 1 piece prefilter cassette, class F6, 4 mӲ, 1 piece HEPA-filter as mainfilter, class H13, 13,9 m, 1 piece unit as described above (w/o accessories), ready for installation, Color powder paint RAL 5010 (gentian blue), other colors possible on request >