عضویت 
ورود اعضا
راهنمای خرید
900MPV0 pages
GB
Developed for YOUR benefit...
CHASSIS:
Articulated chassis in heavy-duty construction with fixed axles.
Centre pivot with pendulum bar and hydraulic stabilisers with
hydraulic locking of the oscillating movement as standard. The
centre pivot is fitted with large spherical pivot bearings.
¿ Articulated chassis with weight transfer
STEERING:
Hydrostatic pivot steering with Load Sensing hydr. and 2
double acting cylinders. Separate hydr. pump for steering.
Steering angle, max............................................... ± 37°
¿ Centrally-located cab and engine
AXLES:
Rigid heavy duty axles with planet gear in hubs and direct
mounted hydraulic motors on each axle. Separate oil chambers for differential and hub. Front axle with automatic limited
slip. Rear axle with 100% hydraulic activated differential lock.
TRANSMISSION:
Electronically controlled hydrostatic transmission with continuously variable speed in the entire speed range. Variable motor
- one at each axle with direct drive - without prop shafts.
Electronically controlled with differential lock,
power control and 4 driving modes:
Driving mode, 0-40 km/h continuously variable speed
- proportional to engine rpm.
Working mode, 0-10 km/h
- speed is proportional to engine rpm.
Constant mode, 0-20 km/h
- adjustable speed, that can be kept constant,
independent to engine rpm.
Double command, 0-10 km/h
- the machine can be driven and operated by means of the
joysticks with the driver being placed in reverse direction.
BRAKES:
Twin circuit hydraulic servo system with oil-immersed disc
brakes on each wheel. Self-adjusting and maintenance-free.
Parking brake: “FAIL-SAFE” with electro-hydraulic activation
of the wet disc brakes on the front axle. Optional hydraulic
trailer brake.
HYDRAULIC:
The hydraulic system consists of 3 separate systems. Working
hydraulics: Max. Flow 165 l/min at 2200 rpm. Max pressure
215 bar. - and driving hydraulics and steering hydraulics. Hydraulic valves in both ends with electronically activated double
acting proportional valves.
SCV's, front:
4 sets of 3/4'' max. pressure: 215 bar, 100 l/min.
SCV's, rear:
4 sets of 3/4'' quick-couplers. max. press.: 215 bar, 100 l/min.
1set of 3/4'' quick-couplers. max. press.: 215 bar, 15 l/min.
ENGINE:
Perkins 1104C-44TA stage 2 engine. 4.4 l turbo-diesel engine
with air/air intercooler and direct injection 91 kW/123 hp at
2200 rpm. Max. torque: 434 Nm at 1400 rpm. (380 Nm at 1000
rpm). Minimum 90% torque available between 1000-2200 rpm.
Latest engine technology that meets EEC stage 2 requirements
for exhaust emission. Fuel tank cap. 135 l.
ELECTRIC SYSTEM:
Voltage ....................................................................... 12 V
Generator................................................................. 120 Amp.
Battery ................................................................. 2 x 74 Ah.
Mechanical protection of electrical cables outside cabin.
900MPV
900MPV
SERIES 2
STANDARD EQUIPMENT:
¿ Tool and appliance mountings both front and rear
¿ Computer-controlled hydrostatic transmission
¿ Powerful environmentally-friendly stage 2 engine
developing 123 hp
¿ Powerful CLS hydraulic system with numerous
functions front and rear
¿ Electric servo and double command
¿ Joystick control of all functions
¿ Tool frames front and rear with hydraulic quick hitch
¿ Computer-controlled instrument panel
¿ Endless range of applications
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
¿
Large telescopic side-view mirrors with swivel joint
Non-slip step for cab access and egress
Electric servo and double command
Computer-controlled instrument panel
Service computer with hire menu
Comfortable seat with armrests
Electronic Mode Control
8 working lights in the roof
Centre pivot with hydraulic stabiliser
and weight transfer
Oscillating lock
Maintenance-free service and parking brake
Front axle with automatic limited slip differential
Rear axle with 100% hydraulic disc differential lock
Electronically controlled hydrostatic drive with
continuously variable speed regulation
3-stage hydraulic system: working hydraulics,
driving hydraulics and hydraulics for pivot steering
Wiper motor – interval function/sprinkler
Rubber-suspended steering orbitrol (low noise)
Maintenance-free plastic wings
Adjustable steering wheel
Permanent 4-wheel drive
19.5R24 tyres
Constant tracking of front and rear wheels
120 Amp. alternator
SERIES 2
A/S HYDREMA DANMARK
Gl. Kirkevej 16
DK-9530 Støvring
Tel.: +45 98 37 13 33
Fax: +45 98 37 19 96
e-mail: hydrema@hydrema.com
EXTRA EQUIPMENT:
¿ Hydraulically tiltable tool frame with hydraulic
quick shift, front and rear
¿ Fixed tool bracket, front and rear
¿ Three-point hitch, front and rear
¿ PTO, front with 1000 rpm
¿ PTO, rear with 540 rpm
¿ Swinging drawbar, rear
¿ Height adjustable hitch, rear
¿ Air-condition
¿ Engine heater (220 V)
¿ Twin tyres: 600/55R26.5
¿ EM tyres: 17.5R25
¿ Nokia tyres: 480/65R24
¿ Belly plate, front
¿ Inch pedal (for reducing speed independently of engine revs)
¿ Pressureless return line to hydraulic tank, front
¿ Pressureless return line to hydraulic tank, rear
¿ Hydraulic, front:
¶ 3/4'' SCV with option of float facility
¶ 1'' SCV with constant flow
¶ Valve for float facility/damping of 3/4'' SCV
Hydraulic, rear:
¶ 6th and 7th SCV above crossover valve with
optional float pos.
¶ 1'' SCV with constant flow
¿ Hydraulic trailer brake
¿ Bio-oil
¿ Replacement of quick hitch connections with screw
connections
Foto may show optional equipment - Subject to alterations - 0855321- 12/2004
TECHNICAL DATA:
GB
HYDREMA TOOLS AND APPLIANCES:
¿ Telescopic loader 3 tonnes with
Hydrema or BM quick hitch
(tool frame or tool bracket required)
¿ G4 build on excavator, 280o working area
(tiltable tool frame required)
¿
¿
¿
¿
¿
¿
¿
Rubber support plates for stabilisers on excavator
Set of hoses for hammer
Set of pipes for rotary bucket excavator
Tool adapter (tool frame or tool bracket required)
Unimog frame (tool frame required)
Counterweight platform (1000 kg)
Set of pipes for optional hydraulics on
telescopic loader
w
w
w
.
h
y
d
r
e
m
a
.
c
o
m
"
