Typ 530 pages
Datasheet Type 53 ■ Single rod cylinder with hydraulic interlock
nnnnC - Tie rod cylinder with hydraulic interlock; dimensions according to
nnnn.2 ISO 6020/2, DIN 24554
nnnnQ. - Stroke up to 2000 mm
nnnn"C - Piston diameter: 40 - 200 mm
nnnnyj - With / without cushioning (identical dimensions)
nnnn<D - Two area ratios phi = 1.4 and phi = 2.0
nnnn^ -16 mounting types as well as the choice between 2 piston area ratios
nnnnand various seals enable an optimal adaptation to each individual case
nnnn- More mounting types and special designs are available
nnnn- The installation dimensions are according to DIN 24554, the installation
nnnnspaces of the seals are realized according to DIN ISO 5597 and DIN ISO 6547
nnnn- The cushioning is precisely adjustable
nnnn- Large sized check valves enable extending with high speed at full impact to
nnnnthe effective piston area
nnnn- The mounting type, the tie rod design, large sized guide lengths at the piston
nnnnrod and piston as well as high quality materials enable the use of the cylinder
nnnnunder most severe conditions
nnnn- The guide bush and the piston rod seal can be disassembled from the rod
nnnnoutlet side which enables quick and simple maintenance
nnnn- The hydraulic interlock allows locking of the piston rod in the front end position
nnnnby default. For pushing operation, the interlock is also available in the rear end
nnnnposition on request
nnnn- The functional principle assures reliable interlocking in the desired end
nnnnposition
nnnn- Pre-stressing with operating pressure provides high stiffness even at large
nnnnforces
nnnnW - Operating pressure: 160 bar (16 MPa)
nnnn(0 - Test pressure: 240 bar (24 MPa)
nnnn- Temperature range of hydraulic fluid: - 20 ... + 80 °C
nnnn(0 - Viscosity range: (20 ... 80) 10 6 m2/s
nnnn.2 - Piston speed: < 0.5 m/s
nnnnO Hydraulic fluids:
nnnn£
nnnn- Mineral oils, HFD liquids in conjunction with seals of
nnnnPTFE and fluoroelastomers
nnnn- HFA, HFB and HFC liquids on request
nnnnHYDRO/WEC/
nnnnpartner for hydraulics
nnnncylinders - drives - special solutions
nnnnExternal thread, ref. no. 0
nnnnExternal thread, ref. no. 4
nnnnCylindrical, ref. no. 2
nnnnEM
nnnnKK
nnnnN
nnnnPlain rod eye, ref. no. 5
nnnnCK | CL
nnnnER
nnnnCM
nnnnInside thread, ref. no. 1
nnnnSF
nnnnm S - | |||||
S " | |||||
.AE. | |||||
1x45°°, | AS | WL |
Clutch element, ref. no. 3
nnnnSwivel head, ref. no. 8
nnnnSpecial design
nnnnon request!
nnnnClevis, ref. no. 9
"