عضویت 
ورود اعضا
راهنمای خرید
DY2008 - Adhesive Pattern Controller0 pages
The Next Level of Technology
DY2008 - Adhesive Pattern Controller
The DY2008 Pattern Controller from ITW Dynatec, used in conjunction with your hot melt adhesive applicator,
accurately controls glue output for reduced waste and more consistent output. The pattern controller activates
solenoids for 4 up to128 applicator heads in order to create individual adhesive patterns. Each channel can
operate in one of several distance-based modes: glue beads, dots, continuous gluing, random product length
and stitching. The adhesive application can be triggered with a photo eye, proximity switch or by exceeding a
certain machine speed.
DY2008 Distance-Based Pattern Controller:
• 4 to 128 channels with 16 patterns per channel.
• Memory for 60 programs
• Easy-to-navigate menu structure
• Machine speeds to 1200m/min (4000fpm) @0.5mm (.02”)
• Modes include standard, continuous and random length
Performance
Trigger inputs for each channel
allows user to
Simplicity
Easy-to-navigate user
interface allows for simple
set up and operation.
Flexibility
Activates solenoids for 4-128
applicator heads to create
individual adhesive patterns.
ITW Dynatec - DY2008 Pattern Controller
The Dynatec Difference...
Switch to Stitch and Save
Replace a 6” continuous adhesive bead with a 6” skip
pattern, and you cut adhesive consumption by up to 50%.
It’s simple, and the savings are certain. The TPC-9 also
goes the extra mile with a built-in algorithm that always
ends an event with glue when using a stitch pattern so the
edge is never “skipped”. Make the switch today and see
the savings for yourself!
