AIR-1000 Series Inclinometer Angle Readout0 pages
AIR-1000 Series
Inclinometer Angle Readout
The Jewell AIR-1000 is a microprocessor based panel meter designed to take the
output from Jewell’s gravity referenced inclinometers and display it as an angle.
The compact unit provides the ±15VDC sensor excitation, conditions the
inclinometer output and displays the angle down to 0.001 degrees. An RS232 output
is provided for interfacing to a computer, PLC or printer. Bezel and scratch resistant
lenses are sealed to meet requirements of NEMA 4 and a gasket is supplied to seal
the unit to a panel.
AIR-1000 Series Inclinometer Angle Readout Specifications
Features
Ø Splash Proof Bezel
Ø Heavy Duty Aluminum Case
Ø Front Panel Switches for
Programming and Calibration
Ø 4 ½ Digits, 0.56 “ LED Readout
with Negative Indication
Ø Two Set-Points with Relay
Closures
Ø Short Case, Only 4” Behind
Panel Depth
Ø Programmable for Different
Range Inclinometers
Ø RS232 Interface
Ø 0 to 10VDC Analog Output
Ø ±15 VDC Sensor Excitation
Performance
Display
4 ½ digit, seven
segment red LED 0.56 inches high
Full Scale
Programmable; ±1.000°, ±3.000°, 14.50°, ±30.00°, ±90.00°
Accuracy
±0.01% of reading ±2 counts of LSD up to 60.00°
±0.1% of reading ±2 counts of LSD from 60.00° to 89.00°
Polarity Indication
“-“ Displayed
Resolution , Auto-Ranged
0.001° below 10°
0.01° above 10°
Tare
up to 50% of span from single front panel switch
Analog Output
0 to 10VDC tracks display
Analog to Digital Conversion
Technique
16 Bit Sigma Delta
Rate
3 conversions per second
ASCII RS232 Serial Interface
Format
1 start bit, 8 data bits, 1 stop bit, no parity bits
Baud Rates, Programmable
9600, 4800, 2400, 1200, 600, 300, 150, 75
Electrical
Input Voltage
105 to 132 VAC (47 to 500 Hz)
Input Current
<50mA
Inclinometer Excitation
±15VDC (±15mA)
Environmental
Temp Range, Operating
-20 to +60ºC
Temp Range, Survival
-25 to +85ºC
Relative Humidity
0% to 90% Non-condensing
sales@jewellinstruments.com
www.jewellinstruments.com
800 227-5955
"