IBAK FAIR0 pages

New Products on Show

Made in Germany
All IBAK products have one thing in common: They are „Made in Germany“ All
.
system components are developed, produced, assembled and tested by IBAK.
Thanks to their high quality standards,
IBAK products have set the standards for
investment security and economic efficiency – for more than 60 years.
IBAK Helmut Hunger GmbH & Co. KG
Wehdenweg 122 | 24148 Kiel | Germany
Tel. +49 (0) 431 7270-0
Fax +49 (0) 431 7270-270

The New LISY
(IBAK Satellite Inspection System):
The new LISY (version 3.2) with its
improved push rod drive system permits
very performance-oriented and effective
working procedures.
In addition, it can hold various flushing
hoses and IBAK push rods and, depending
on the requirements, the customer can
choose between a Magic Push Rod or a
Perfect Push Rod for his satellite inspection system. Whereas in the past it was
only possible to use a Magic Push Rod, a
Perfect Push Rod can now also be used.
Because of its small diameter, this push
rod has a light weight and its stability guarantees a long range. At the same time, it
has 90 degree bend-passing capability.
Furthermore, with the new LISY, the
propulsion speed is infinitely variable and freely selectable.
The new observation camera LISYCam 200 now
enables mainline sewers with small diameters
(from DN 200 upwards)
to be negotiated without any problem by the
LISY and laterals to be
inspected from these
with excellent visibility.
The LISYCam 3 is used
as usual in DN 150
pipes.
In diameters of less
than DN 150, inspections are still performed without using
a satellite inspection
unit, just by flushing
the camera through.

3D-GeoSense
(without Flushing Drive) with the
New LISY and a Perfect Push Rod on
the LISY Synchron
With the IBAK LISY 3 system for lateral
inspection (satellite system and calibrated ORION with the Kiel Rod guide device
or POLARIS as the case may be), the
inspection and the pipe run survey are
performed in one single operation.
The system permits the inspection of
laterals from DN 100 upwards from
mainline sewers. The system is driven
by flushing or, as is now the case with
the new LISY generation, also simply by
using the push rod of the LISY system.
With the flushing alternative, the pump,
the hose and the nozzle are optimally
suited to each other so that, together
with the very light camera, it is possible
to flush the system a long way without
using very much water.
However, if you want to perform the survey with a conventional satellite system
without a flushing unit, this is also possible. The new LISY with its improved drive
system for the push rod (Perfect Push
Rod) permits very performance-oriented
and effective working procedures.
The IBAK pipe run survey system uses a
very small, precisely precalibrated sensor
installed in the camera (ORION 2.8L D,

ORION 2.9 3D, POLARIS 3D). The integrated sensor is particularly small and
space-saving and is calibrated ingeniously
before use. This calibration and a compensation procedure to eliminate clear
systematic sensor errors contribute to
ensuring a most precise display of the
run of the lateral network.
The gradual generation of the lateral network can be observed in real time on the
monitor.
The operator can choose whether the
pipe run is to be surveyed when the system is moving forwards or in reverse.

3D-GeoSense Compact
Push Rod System
As it is now possible to perform a pipe
run survey in push rod operation, a compact, portable system can be used.
The system consists of a coiler with a
push rod, a control box* and a camera
with a camera guide device.
The precalibrated camera (ORION
2.8L 3D, ORION 2.9 3D, POLARIS
3D) with an integrated 3D sensor is connected to a push rod.
The DEIMOS 3D camera guide
device ensures that the camera
is stabilized during the survey of
the pipe. During the inspection
in push rod operation, the measured data (xyz coordinates) from
the 3D sensor are collected fully
automatically. This is done in a
single operation together with
the TV inspection.
The coiler HSP 60 holds 80 m
of push rod (Perfect Push Rod).
Length data are transmitted directly to the
software by means
of the counter
installed on the coiler.
The new control box (version BK 3.5.2) with an
improved 12“ daylight-capable video TFT colour monitor,
a new SD recorder** and a PC
module permits the xyz coordinates to be recorded, provided
that the IKAS evolution software

is used. With IKAS evolution, real-time
display of the surveyed pipe run as a network graphic is also possible during the
TV inspection.
This 3D-GeoSense compact system also
provides a complete, efficient pipe run
survey system that is easy to transport
and which surveys the pipe run at the
same time as the inspection with only
slightly higher time and cost requirements and displays this as a graphic.
*t With a PC module and IKAS evolution software
**t he new recorder records in high resolution and is available as
T
an option

3D-GeoSense
Pipe Run Surveying in
Mainline Sewers
To survey the pipe run in mainline sewers,
all that is required is a conventional IBAK
system equipped with the corresponding
IBAK software and a camera with a precalibrated sensor (ORION 2.8L, ORION 2.9,
POLARIS 3D). During the inspection of
the collector, the xyz coordinates can be
determined in this way without any additional effort and the actual pipe run can be
displayed in the plan.

POLARIS 3D
The POLARIS push rod camera was
developed by IBAK in order to satisfy the
demand for a bend-capable camera that
can change direction by 90° with a 100%
field of view. This pan and rotate camera
can be used in DN 100 pipes upwards.
Because the camera is positioned right at
the front, no guide device can be seen in
the picture during the inspection.

The POLARIS is compatible with the
IBAK LISY satellite system, the mobile
push rod systems MiniLite and MobiLite
and the 3D-GeoSense compact push rod
system with a control box.
The camera can rotate automatically
(360°) to inspect pipe joints. Two preselectable focus memory points facilitate
in particular the joint inspection function
so the user gets along faster as frequent
refocussing is no longer required.
Finally, the sensor already contained in
the ORION 2.8L and the ORION 2.9 has
also been integrated into the POLARIS, so
that the calibrated version POLARIS 3D
is now likewise an important part of the
3D-GeoSense pipe run survey system.

IBAK Helmut Hunger GmbH & Co. KG | Wehdenweg 122 | 24148 Kiel | Germany | Tel. +49 (0) 431 7270-0 | www.ibak.de