Spectrophotometers / Portable FD-70 pages
SYSTEM DIAGRAM
USB Cable
IF-A20
DIMENSIONS (Units: mm)
AC Adapter
Spectrodensitometer
FD-7/FD-5
White
Calibration Plate
FD-A06
Target Mask
FD-A01
Ruler
FD-A02
FD-5, FD-7
Standard accessories
Illuminance Adapter
FD-A03
PC software
Optional
accessory
84.2
PC
(commercially
available)
3-in-1 next-generation measurement tool
Soft Case
FD-A05
Standard accessories
only of FD-7
Optional
accessories
25
Color
6.2
Main specifications
Model
Spectrodensitometer
FD-7/FD-5
90
70
171.5
165
Protection
glass
FD-A04
NEW
With removable taget mask attached
FD-7
FD-5
Illumination/viewing system
45°a: 0°(annular illumination)*1
Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition a for reflectance measurements.
Spectral separation device
Concave grating
Wavelength range
Spectral reflectance: 380 to 730 nm; Spectral irradiance: 360 to 730 nm Spectral reflectance: 380 to 730 nm
Wavelength pitch
10 nm
Half bandwidth
Approx. 10 nm
Measurement area
Ø3.5mm
Light source
LED
Measurement range
Density
Density: 0.0D to 2.5D; Reflectance: 0 to 150%
Illumination
Density: σ0.01D
Colorimetric: Within σΔE00 0.05 (When white plate is measured 30 times at 10-second intervals after white calibration has been performed)
Within ΔE00 0.3 (Average of 12 BCRA Series II color tiles compared to values measured with a master body under Konica Minolta standard
conditions)
Short-term repeatability
Inter-instrument agreement
Measurement time
Approx. 1.4 s (single-point reflectance measurement)
Colorimetric values, color-difference values, density values, density- Colorimetric values, color-difference values, density values, densitydifference values, dot area ratio, dot gain, PASS/FAIL judgment, difference values, dot area ratio, dot gain, PASS/FAIL judgment
illuminance, correlated color temperature
Corresponding to ISO 13655 Measurement Conditions M0 (CIE Illuminant A), M1 (CIE Illuminant D50), and M2 (illumination with UV-cut
filter); User-defined illuminant
Displayed values
Measurement conditions
Illuminants
A, C, D50, ID50, D65, ID65, F2, F6, F7, F8, F9, F10, F11, F12, User-defined illuminant
Observers
Color spaces
2° Standard Observer, 10° Standard Observer
L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ and color-difference in these color spaces
Color-difference equations
ΔE*ab (CIE 1976), ΔE*94 (CIE 1994), ΔE00 (CIE 2000), ΔE (Hunter), CMC (l:c)
Indexes
WI (ASTM E313-96); Tint (ASTM E313-96); ISO Brightness (ISO 2470-1); D65 Brightness (ISO 2470-2); Fluorescence index
Density
ISO Status T, ISO Status E, ISO Status A, ISO Status I; DIN16536
Storable data
Colorimetric target data: 30 data; Density target data: 30 data
Display language
English, French, German, Spanish, Japanese, Chinese (Simplified)
Scanning measurements*2
Scanning measurement of a color chart can be performed.
Interface
USB 2.0
Output data*2
Displayed values; Spectral reflectance data; Spectral irradiance data Displayed values
Power
Rechargeable internal lithium-ion battery (Number of measurements per charge: Approx. 2,000 when new); AC adapter; USB bus power
Dimensions (W × D × H)
70 × 165 × 83mm (Body only); 90 × 172 × 84mm (With target mask attached)
Weight
Approx. 350g (Body only); Approx. 430g (With target mask attached)
N/A
Operating temperature/humidity range 10 to 35°C, 30 to 85% relative humidity with no condensation
Storage temperature/humidity range
0 to 45°C, 0 to 85% relative humidity with no condensation
*1 Illumination for wavelengths under 400nm is unidirectional. *2 Available when using PC software.
SAFETY PRECAUTIONS
For correct use and for your safety, be sure to read the instruction
manual before using the instrument.
Always connect the instrument to the specified power supply
voltage. Improper connection may cause a fire or electric shock.
•
•tDisplays shown are for illustration purpose only.
•tKONICA MINOLTA and the Konica Minolta logo and
the symbol mark, and "The essentials of imaging"
are registered trademarks or trademarks of KONICA
MINOLTA HOLDINGS, INC.
•tThe basICColor logo is a registered trademark of
basICColor GmbH.
Certificate No : YKA 0937154
Registration Date : March 3, 1995
Certificate No : JQA-E-80027
Registration Date : March 12, 1997
Streamlines color adjustment
in printing, even on substrates
with fluorescent whitening agents
©2010 KONICA MINOLTA SENSING, INC.
9242-4897-10 BALAPK 1
"