Attrition Cells0 pages
o
SERIES 9000
Attrition Cells Spec Sheet
• ATTRITION CELL
- Heavy duty rubber lined tank designed to minimize
vortexing, back-mixing, short circuiting and dead zones.
Round tank with baffles on the Model #AC 900-1 and
hexagonal tank(s) on the Model #AC 2100-2 and
#AC 4200-4
- Access ports with bolt-on covers
- High speed, rubber lined, oppositely pitched turbines.
Twin impellar blades on the Model #AC 900-1 and triple
blades on the Model #AC 2100-2 and #AC 4200-4.
Custom turbine designs available - consult factory
- _HP, TEFC, 3/60/230-460 heavy duty drive
assembly with Faulk direct coupled right angle gear
reducer
Discharge
POWER REQUIREMENTS & APPROX CAPACITIES
Model | HP | Volume | No. of Cells | Shape of Cells | Approx. Capacity |
AC 900-1 | 50 | 900 gals. | 1 | Round with baffles | 133 stph |
AC 2100-2 | 2@ 100 | 2100 gals. | 2 | Hexagonal | 310 stph |
AC 4200-4 | 4@ 100 | 4200 gals. | 4 | Hexagonal | 620 stph |
FOR MDRE INFORMATION CALL 1-800-542-9311 AND ASK FOR A KOLBERG EQUIP/VENT SPECIALIST
NOTE: Specifications are subject to change without notice.
Because KPI-JCI may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by KPI-JCI may not necessarily be as illustrated therein Also continuous design progress makes it necessary that specifications
be subject to change without notice All sales of the products of KPI-JCI are subject to the provisions of its standard warranty KPI-JCI does not warrant or represent tfiat its products meet any federal, state, or local statutes, codes, ordinances, rules, standards or other regulations
including OSHA and MSHA. covering safety, pollution, electncal wiring, etc Compliance with these statutes and regulations is the responsibility of the user and will be dependent upon the area and ttie use to which ttie product is put by the user In some photographs, guards may have
been removed for illustrative purposes only This equipment should not be operated without all guards attached in ttieir normal position Placement of guards and other safety equipment is often dependent upon the area and how the product is used A safety study should be made by
Ihe user of the application, and, if required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products_
KPI-JCI
AST EC COMPANIES
700 W 21st. St., Yankton, SD 57078
1-800-542-9311 Fax:605-665-8858
Email: mail@kpijci.com
www.kpijci.com
Mdl 9000 attrition cell 05/12
"