AIR SENTRY - Inclosed breather0 pages

AIR SENTRY® 1512L143
I N C L O S E D B R E A T H E R
Removes Dirt and Moisture from Incoming Air
AIR SENTRY® inclosed breather
Replaces the standard filtercap or vent
tube on Tank and Reservoir and will
give you CLEAN DRY AIR.
Protect the fluid
Reduce oil oxidation
Reduce component wear
Reduce maintenance costs
Enhance lubrication
Prolong fluid and filter life
Minimize rust and corrosion
The inclosed breather is developed for
working under wet conditions and areas
with extreme high humidity levels.
AIR IN
When the reservoir inhales, air is drawn in
through the 4 channels of 6mm, 90° apart of the
Topsection (1). The air will pass a checkvalve
(4), which opens, at a vacuum of 0.02 bar. AIR
will enter the standard L134 filter and passes a
plastic screen (5) that works like an Air diffuser
to bring it trough the 2 micron filter (6) to
remove particulate contamination’s.
Moisture will be removed by the high capacity
desiccant (7). The Air will pas the Bottom
section where an Air filter optional vacuum
indicator can be mounted (8). Filter has a ½”
female connection on the bottom (9)
AIR OUT
When the reservoir exhales, Air passes the
check valves in the Bottom section at 0.02 bar
pressure. This filterunit can be used on 99% of
all applications.
Important!!
Air filtration 2 micron at 99,9%
efficiency
Air capacity is max.280 L/min
Replace filterelement L134 when color
turns from orange to green.
Distribitor:
AMCA HYDRAULIC FLUID POWER BV
P.O.BOX 18, 9790AA TEN BOER
THE NETHERLANDS
Tel: +31 (0)50-3023577
Fax:+31 (0)50-3021226
E-mail:sales@amca-nl.com
Homepage:www.amca-nl.com
Publ. L-AS-E-02/3
Air flow in Air flow in
Air flow out
9
8
4
2 6
7
6 5
4
1