عضویت 
ورود اعضا
راهنمای خرید
FLOMID FX series0 pages
FLOMID FX
Electromagnetic Flowmeter
Working pressure manufacturing according to
PED 97/23/CE (Lloyd’s Register Certificate Nº 031)
Introduction
Modular design in two versions:
• Compact, sensor and electronics unit forming a single unit
• Separate, sensor and electronics separated, joined by a cable
Various possibilities of pipe fittings:
• Flange: EN 1092-1, ANSI, JIS standards etc.
• Sandwich: for EN 1092-1, ANSI, JIS flanges etc.
• Sanitary: DIN 11851 thread, ISO 2852 Clamp, SMS 1145 thread
• Sanitary welding: DIN 11850, ISO 2037 standards
• Working pressure manufacturing according to
PED97/23/CE (Lloyd’s Register Certificate Nº 031)
Sensor liners PP, PTFE, PVDF & Hard rubber Electrodes in
EN 1.4404 (SS 316L), Hastelloy C22 (UNS-06022), Zirconium,
Titanium, Tantalum Exterior construction in EN 1.4404 (SS 316L).
Benefits
• Flow rate measurement is independent of the flow profile
• Pulsed coil excitation to obtain a minimum zero drift
• Readings are independent of density, temperature,
viscosity and pressure
• Absence of obstructing elements gives zero pressure loss
and will allow the pass of solids
• Can be mounted in any position, provided that the pipe
•
•
•
•
•
•
is always full
Low power consumption
Good stability with temperature and age
No moving parts provides zero maintenance
Can be installed with short straight pipe sections (5DN / 3DN)
Good chemical resistance of construction materials
All electronic control units for use with all sensors
Technical data FLOMID FX sensor
•
•
•
•
•
Accuracy:
+ 0.5% of reading
Working pressure: PN16 standard, on demand up to PN250
Coupling according to EN 1092-1, ANSI, JIS, Sanitary
DN3...DN500
Working temperature: PP, -10...+80 oC
PTFE, PVDF, -20...+120 oC
Hard rubber, -20...+90 oC
(temperatures for sensor with separated electronics)
