BetaGauge PIR Digital Pressure Gauge0 pages
BetaGauge PI Reference Class
Digital Test Gauge
Features:
• The most accurate digital test guage available
with accuracy of ±0.04% of reading ±0.01% F. S.
• Temperature compensated accuracy over
0 to 50 °C
• Standard available pressure ranges — 30 PSI
Compound (C/V), 30 psi, 100 psi, 500 psi, 1000
psi, 3000 psi
• Displays in 20 standard or 1 custom
engineering unit
• Displays ambient temperature in °C or °F
• Large, back-lit, 5-1/2 digit display with 0.65" high
digits and 20 segment bar graph
• Rugged stainless steel case meets NEMA 4/IP65
• MIN/MAX recall
• Adjustable TARE zeros large system offsets
• User-confi gurable sample rate maximizes measurement
performance and battery life
• User-confi gurable damping smooths readings
from pulsating/plant air sources
• Auto Shut-off for extended battery life
• Low battery indicator
• CSA intrinsically safe, Class 1, Div. 2 Groups A, B,
C & D; ATEX approval pending; CE approved
• Available with optional 24 V external power input
• Rubber boot standard on all stand-alone bottom
mount gauges
Description:
As with the original high accuracy BetaGauge PI
gauges, the BetaGauge PIR takes the concept of a
simple analog Test Gauge and combines it with the
accuracy of digital technology. The new Reference
Class gauges provide exceptional performance with
±0.04% of reading accuracy, especially when operated
below 50% of their range..
The Reference Class BetaGauge PIR digital test
gauges are available six ranges — 30 psi Compound,
30 psig, 100 psig, 500 psig, 1,000 psig, and 3,000
psig. Setup of the BetaGauge PIR is fast and
straightforward, through a menu-driven display, with
minimal text and intuitive functions, that is simple
enough to allow the gauge to be used anywhere in
the world without the need for multilingual displays.
Pressure readings are displayed in any one of 18
standard engineering units, or in user-defi ned custom
units, eliminating tedious conversion calculations.
Readings are displayed on a 5-1/2 digit, 0.65” high
digital display and companion percent-of-range bar
graph. Accuracy is temperature-compensated over
a 0 to +50 °C range. The internal temperature sensor
measurement can be displayed in degrees Celsius or
Fahrenheit.
The BetaGauge PIR provides an unmatched feature
set, offering the user many options for ease-of-use.
The reading sample rate can be adjusted to match
the type of measurement, such as for pressure switch
threshold points, instrument-grade readings, fi ltered
readings, and a power-saving 1 reading per 2 seconds
“sleep” mode. A MIN/MAX function instantly
recalls pressure reading extremes. In addition to a
Zero function, large residual system pressures can be
nulled using the TARE adjustment. When combined
with custom engineering units, the TARE adjustment
allows the BetaGauge PIR to be used in a variety
of liquid level and volume measurements, easily
reading units of interest directly, such as gallons in
a tank. Password-protected fi eld calibration may be
initiated through the keypad. An auto shutoff feature
may be enabled for a preset interval to extend battery
life. Damping can be set to integrate readings to
accommodate pulsating sources, such as plant air.
An RS232 port allows pressure reading data to be
extracted directly from the gauge for off-line analysis.
A protective rubber boot is provided as standard to
help protect the gauge from damage if dropped.
A number of options are available for the BetaGuage
PIR Digital Pressure Gauge making the gauge suitable
in virtually any application. An optional 24 VDC
external power input is available for applications
where the gauge will be permanently incorporated
into a process line. A self-contained calibration kit
is available which includes a BetaGauge PIR, hand
pressure pump, and associated fi ttings.