Wind Direction Sensor0 pages

Specification Sheet
McCrometer CONNECT
Wind Direction Sensor
Pro10

Pro10 Wind Direction Sensor
For use with the A723s4, A753, and A752 Field Monitoring Stations
McCrometer CONNECT offers the Pro10 Wind Sensor as a standalone sensor, for applications where knowing wind direction, but not
wind speed is needed, or as an add-on to field stations that already measure wind speed..
The PRo10 wind direction sensor has a very low starting threshold of less than 0.4m/s, and offers an accuracy of better than +/-2.5
degrees.
The housing is constructed using seawater resistant anodized aluminum, to withstand even the harshest of environmental
conditions. It requires very little maintenance and will remain within it’s original specifications for many years.
Please consult Selection area at the bottom of the page for ordering details.
Specifications
Pro 10 Wind Direction Sensor
Measuring Principle

Magnetic

Measuring Element

Wind vane, Aluminum

Measuring Range

0 to 360°

Accuracy

±2.5°

Starting Value

<0.4m/s (1.44 km/h)

Output Signal

DC 0 to 2.5V

Case

Sea water resistant anodized aluminum

Operating Temperature

-40°C to +70°C (non-icing); 0 to 100% rH

Dimensions

Sensor: 5.13 in. (130 mm) x 8.25 in. dia. (210 mm), Mounting Arm: 19.75 x 2.38 x 4 in. (502 x 60 x 102 mm)

Mounting

Mounting arm with mast attachment for poles with Ø of 40mm; 2 W4-grade stainless steel pipe clamps included;
alternatively in bores with Ø 30mm at max. 10mm wall strength

Weight

1.54 lb. (700 g) approx.

Standards

VDI 3786, sheet 2 / WMO No.8

3255 WEST STETSON AVENUE • HEMET, CALIFORNIA 92545 USA
www.mccrometer.com
TEL: 951-652-6811 • 800-220-2279 • FAX: 951-652-3078 Printed In The U.S.A. Lit. # 30120-95 Rev. 1.0/03-13
Copyright © 2013 McCrometer, Inc. McCrometer, McCrometer CONNECT and NanoCourier are all trademarks of McCrometer, Inc. All printed material should not be
changed or altered without permission of McCrometer. Any published technical data and instructions are subject to change without notice. Contact your McCrometer
CONNECT representative for current technical data and instructions.