Torque Reference Bottle0 pages

testing to perfection

Torque Reference Bottle

Mecmesin's ‘Torque Reference Bottle’ provides a
cost-effective means of quickly verifying the
calibration of motorised torque measuring systems
such as the Vortex-i, Vortex-xt or Vortex-d.

The Reference Bottle contains permanent magnets,
which are pre-configured at our factory to repeatedly
slip at a customer-specified torque value between
9 - 17 lbf.in (1 - 1.9 N.m).

The 1/4” hex shaft of the Reference Bottle can be
connected to your torque sensor via a standard
1
/4” - 3/8” adaptor. Alternatively, a Mecmesin ‘Drive
Adaptor’ is available for use with traditional
fixing pegs.

Once connected, simply run the motorised torque tester
and compare the displayed reading to the pre-configured
slip-torque of the reference bottle.

Used daily or before each testing batch, the Reference
Bottle indicates whether your torque sensor is within limits
or requires calibration.
Each Reference Bottle is labelled with a unique serial
number indicating the torque value and is supplied with
its own verification certificate.

Key Features

• Repeatedly slips at pre-configured torque value
• Quick and easy ‘check-calibration’

Ordering Information

Mecmesin Reference bottle: PSV-12093-XXX

Use the part number to specify the torque to the
nearest 1/2 lbf.in between the range 9 - 17 lbf.in
Examples:

PSV-12093-120 - for 12.0 lbf.in
PSV-12093-135 - for 13.5 lbf.in

Drive adaptor for use with Reference Bottle and
Mecmesin standard Upper Fixing Plate with
4 pegs: PDV-12106

Contact Mecmesin today

e: sales@mecmesin.com • t: +44 (0) 1403 799979 • www.mecmesin.com