B4 NON STOP0 pages

Speed control using built-in pump
control board
Easy-to-use controls for
temperatures regulation
Optional Low Level
sensor with light tower

Pneumatic cylinder for optimum contact
between block and melting grille. With rod
indicating end of block

Swiveling tank lid allows quick and easy change
of adhesive blockst

B4
NON STOP

GLUING
SOLUTIONS

0.45L Teflon-coated reserve tank
to make cleaning easier

B4 SERIES

For small consumptions and discontinue production cycles
Easy electronic control
Available for Pt100 or Ni120
Full motor control

Meler B4 Non Stop adhesive melters works mainly
with moisturecure reactive polyurethane (PUR) hot
melt adhesives in two- kilogram foil-encased blocks
with maximum diameter 130 mm.
The B4’s user-friendly design provides secure,
precise and easy operation. It also offers simple
maintenance, easy of cleaning and reduced
adhesive waste.
The concept ‘melt- on demand’ allows discontinued
production cycles. After a partial consumption of
the adhesive block you can stop and restart the
production after some hours or days*. The Meler B4
Non Stop melts only the necessary adhesive for the
application, and does protect the rest of the block
from the heat. No extra dry air or nitrogene supply
is necessary due to the air tight cylinder pressing
system and due to the remaining protection bag of
the adhesive. The pressure and melting system
allows the entire use of the adhesive block, avoiding
any waste of PUR adhesive.

Electronic Control Unit
The B4 Non Stop electronics controls precisely the
temperatures in a range from 40ºC to 200ºC and the
motor/pump speed to adapt the adhesive flow rate
manually or automatically to the conditions of the
application.
Main Use
Meler B4 Non Stop is used for manual and
automatic applications with low glue consumption
such as Clear Box Gluing in Graphic Arts Industry,
product assembly applications in the Automotive
Industry and Wood Working Applications such as
Edge-Banding, etc.

* For detailed operation instructions see user
manual