Fanuc 0C RS232 Connections Manual0 pages

Copyright © 2007 Memex Automation Inc.
Page 1 of 6
Memex Automation Inc.
..................................................................................,
............................................Burlington, Ontario Canada L7N ....1
http://www.memex.ca
Fanuc 0 M/T Model C Serial (RS232)
Connection Guide
The Fanuc 0-C control has two RS-232 interfaces. Interface number 1 (M5) can be wired to the
external DB25 female connector or wired to a built-in tape reader interface (at 4800 baud).
Interface number 2 (M74) is an option and can be wired to the external DB25 female connector.
The baud rate and other parameters are set in NC parameters (see below). For cable and signal
descriptions see our Fanuc RS232 Communications page or document at www.memex.ca.
Applicable Memory Cards (0-C and 0-4PC)
Memory Cards A16B-1212-0210 Analog Spindle
(MEM-A3) A16B-2201-0103 Analog Spindle
A16B-1212-0215 16 bit, Serial Spindle
A16B-1212-0216 32 bit, Serial Spindle
A16B-2201-0101 32 bit, Serial Spindle
Sample “C” Software Versions: 460,462,465,660,662,690,665,880,135…