Heavy-Duty Ratchet Handle0 pages
Product Bulletin
Heavy-Duty Ratchet Handle
DESCRIPTION
The MICO Ratchet Handles are a quality built heavyduty brake levers that can be used in numerous
applications. These levers were designed with heavyduty off-road type applications in mind. They will meet
your park brake system requirements as well as any
number of other actuation demands.
®
MICO® Ratchet Handles can withstand applications
in excess of 200 lb (890 N). The components are
constructed with stamped steel that is either zinc
Model Number: 32-140-020
Lever Ratio................................................................. 8.8:1
Lever Cable Travel................................ 31.8 mm (1.25 in)
Lever Angle.................................................................. 59°
Approximate Size................... 40.6 cm x 11.4 cm x 6.4 cm
t
(16 in x 4.5 in x 2.5 in)
Approximate Weight................................. 1.36 kg (3.00 lb)
plated or electro cathodic paint coated. This type of
paint coating offers up to 1000 hours of automotive
salt spray resistance.
Typical applications range from being used to apply
and release brake or locking cables to controlling
remote actuators, switches or throttle controls. A
ratchet handle model is available with an integral
SPDT snap action switch. See back page for
dimensional information.
Model Number: 32-140-021 (with switch)
Lever Ratio................................................................. 8.9:1
Lever Cable Travel.............................. 18.54 mm (0.73 in)
Lever Angle............................................................... 38.5°
Approximate Size................... 40.6 cm x 11.4 cm x 6.4 cm
t
(16 in x 4.5 in x 2.5 in)
Approximate Weight................................. 1.36 kg (3.00 lb)
SPDT snap action switch......current rating 5 AMP resistive
t
3 AMP inductive @ 30 VDC
This document is intended to provide general information about MICO Products. MICO, Inc. has attempted to present accurate information about MICO Products in its catalogs,
brochures, and other printed materials. MICO, Inc. is not responsible for errors, inaccuracies, or inconsistencies that may exist in any catalog brochure or other printed materials
or any damages arising from or related to reliance on information in them. Materials and specifications for MICO Products set forth in catalogs, brochures, and other printed
materials are subject to change without notice or obligation. Refer to www.mico.com for the most recent versions of our literature. If you have any questions concerning MICO
Products, please contact MICO, Inc. All MICO Products and service are sold and provided subject to the MICO Warranty at www.mico.com in effect on the date of sale or supply.
MICO is a trademark and registered trademark of MICO, Inc. MICO is registered in the U.S. Patent and Trademark Office as well as in Australia, Canada, Indonesia, Japan, Peoples Republic of China, South Korea, and the European Community.
MICO, Incorporated
Innovative Braking and Controls Worldwide
Form No. 80-950-028t
2011-04-19t
1911 Lee Boulevard
North Mankato, MN U.S.A. 56003-2507
Tel: +1 507 625 6426 Fax: +1 507 625 3212
www.mico.com