SC2200 Streaming Current Detector0 pages
• MILTON RO'
SC2200 STREAMING CURRENT DETECTOR
DESCRIPTION
TheMUIon Roy Mcdel SC22CX) Streaming Current Elector ©CD)
Ls an on line dectrokinetk charge analyzer thai measures the net
ionic and particle surface charge in a chemically treated water or
wastewater sample. The SCD allows continuous rnonitoring and
control of the coagulation process, thereby providing*
• Consistent water quality
• Uniform chemical dosing under varying conditions
* Reduced chemical costs
• Reduced manual supervision and/or automatic operation
of the treatment process
The SC2200 is designed to be used with the RM6200 Remote
Monitor Station or the RC7200 Remote Controller Station. Jt
is a complete SCD that can be directly linked with computer
systems, recorders, or suitable process controller* Mounted
remotely, it can be separated from the monitor or control sta*
tion by up to 3000 feet without affecting signal reliability.
Special coaxial cable is not required.
The 5C2200 represents the most advanced level of Streaming
Current Technology available today. The 5C2200's electron-
ic*, sampling sytfern and overall design are the direct result
of years of studies and research and development aimed at
advancing the technology. Though SCO's have been an ac-
cepted part of water treatment for over a decade, the SC2200
incorporates a number of key improvements that provide
even greater stability, response, and improved operation
over previous successful designs.
In addition, the SC2200 is the first of a new generation of
SCO's designed to operate In wastewater treatment. Special
probe designs and electronic advances have opened the door
to controlling coagulant feed to belt presses, centrifuges, and
other dewatehng equipment.
SC2200
JET WASH SAMPLE CELL CLEANING
The Automatic Jet Wash U an optional patented sample cell
cleaning system available on Milton Roy SCO's. The system
is designed to maintain cell cleanliness and signal reliability
by automatically flushing the sample cell on a predetermined
cycle. Rushing is accomplished by injecting water at high
velocity through the bottom of the sampling cell, which
scours the cell surfaces and forces contaminants into the
sample stream drain. Cleaning frequency is field adjustable
to suit the application Signal output is automatically locked
during the cleaning cycle to ensure control stability.
5C2200 MODEL SELECTION GUIDE
SC2200 — [
Output Signal
4 =4-20 mA
Probs> Cleaning Options
0 = Standard Manual Jet Wash
J .Automatic JetWaih'
Operating Voltage
D-nsvAC.SOASOhz
E =230VAC, 50hz
Probe Configuration
F ■ Slar>o>d Flow Through
W = High Flow
Other Options
0 = None
X - Special
Automatic )et Wash is factory set at 30 seconds every 2 hours, jet Wash timing is field adjustable.
Available settings are: 30 seconds to 7 minutes (30 second intervals) every 15, 30, or 45 minutes or 1, 2, or 4 hours
"