EZstripâ„¢ Cake Pump0 pages

EZstrip
Cake Pump
™

The EZstrip series of widethroat
pumps offer a competitive solution
to viscous and solids handling. The EZstrip
Cake Pump includes a specially designed feed
chamber allowing easy access to the rotor and
screw conveyor assembly.
Typical Applications
>tHeavy clay slurries
>tGypsum
>tGrout
>tGrape must
>tMunicipal GBT sludge
>tThick industrial sludge
>tSludge cake up to 40% dry solids t
tcontent
>tSludge blending, including lime t
t powder dosing and lime slurry tt
t dosing in conjunction with barrier t
t layer injection
Capacity
>tup to 215 gal/min
Pressure
>tup to 350 psi
Temperature
>t14°F up to 212°F

Features & Benefits
Maintain-in-Place
A full drive train including rotor, stator,
and screw conveyor can be removed
in minutes without disconnecting
pipework or removing the hopper.
Specially Designed Feed Chamber
Easy access chamber allows access to
the rotor and screw conveyor assembly.
The feed chamber pulls back to allow
full access to the pin joint area for
removal of any compressed cake.
Auger (Feed Screw)
Large auger design is standard on all
units. Optional ribbon screw conveyor
to assist blending or conveying
products and/or an optional separate
bridge breaker to ensure smooth
feeding.
Side Inlet Port
Allows addition of thin sludge for
blending. May be used for draining the
pump.
Materials of Construction
Available in cast iron with a choice of
rotor and stator materials and a variety
of hopper sizes.

Robust Drives
Can be supplied with either fixed
speed inverter rated or mechanical
variable speed drive.
Time and Cost Savings
With a quick and easy way to
disassemble and maintain a widethroat
pump in place, maintenance time
is reduced by more than 93% for
significant cost savings.
No Special Tools Needed
Pump requires only a wrench and an
allen key to maintain.