Catalogue 2016 - Touchscreen Display - CIC-Touch0 pages
CIC-Touch - touchscreen display
CIC-Touch
This multi display for clean room air parameters such as air humidity, temperature, differential
pressure and particles allows to check at a glance the actual climatic parameters in clean rooms.
The online data are provided by external sensors and/or contact relays. Besides the actual
measurement value, which is shown with the respective unit (e.g. temperature, humidity etc.) and
measurement location, also the backlight colour changes according to the actual status. Green
colour for values within the threshold and red colour if the threshold is exceeded.
The CIC-Touch display can be easily mounted in clean room walls without the need of any
screws. The unit can be placed in a wall cavity, snapped in and fixed with clips, which are part of
the display unit itself. Thanks to the consequent clean room suitable design, the installation depth
is very low and hence the unit fits in all current clean room walls. The smooth front panel complies
with the demands of clean room design, is therefore ideal to be cleaned and has no edges
subject to be polluted by dust or any dirt.
Another highlight of the CIC-Touch is the connectivity such as analogue/digital interfaces, contact
relays, ethernet, USB, Modbus, RS-232, RS-485 and a SD card. The CIC-Touch can be easily
connected to any external sensor and also integrated in existing monitoring systems. The
configuration is performed via the intuitive operation and configuration menu.
The CIC-Touch can also be factory configured for specific OEM applications.
Applications:
Clean rooms
Isolators
Laminar flow benches
Operating rooms
Laboratories, calibration rooms
Specific OEM solutions
Your advantages:
Semi-flush with the wall, no sharp edges, front
panel only 2 mm thickness
Easy to clean, flat and smooth surfaces
Low installation depth and ideal for integration
in all current clean room walls
Snap-in mounting without any screws
Display of up to 4 parameters at the same time
Status display with status backlight colour
Easy configuration by intuitive menu
Industries:
Semiconductor
Pharmaceutical
Hospitals
OEM
Several integrated communication interfaces
CIC-Touch touchscreen display
Recommended ambient sensors to be connected:
Air humidity and temperature:
HygroDat 100 (this catalogue on page 21)
HygroMaxx S/R/M (this catalogue on page 10)
TempMaxx (this catalogue on page 17)
Differential pressure:
Pascal-ST/Z (dP catalogue on page 8)
PascalMaxx (dP catalogue on page 12)
260 0941 CIC-Touch display
Doc. 005221.00
Remark: CIC-Touch is an universal display and any
sensor can be connected, it can also be used for
installation in existing sensor networks.
General catalogue AIR 2016
Specifications:
Display:
graphical display 3,5“ TFT
display 70x52mm
Panel:
150 x 120 mm (H2O2 res.)
Mounting H 127 x W 107 x D 50mm.
dimension: incl. connectors
Power
supply:
24 V AC/DC
Inputs:
4 x digital inputs
4 x analogue inputs
Outputs: 2 x relay contacts 230V
Digital
ethernet
interfaces: Modbus (RS-485)
USB:
standard PC compatible
page 35 / 37
"