Series 11 (AM)0 pages

SPECIFICATIONS

OPTIONS AVAILABLE

Angleofthrows : 30°,36°,45°,60°,&90°

available

Contact rating : Silver plated brass contacts

can switch 0.5 Amp load

(resistive) at28VDC and 0.25

Amps (resistive) at 110 VAC.

Silver alloy contacts can

switch 1 Amp (resistive) at

28 VDC and 0.5 Amps

(resistive) at 110 VAC.

Contact rating requirements

on resistive loads as per

SRW02ofJSS51207

200mA at 28 VDC

50mA at 230 VAC

Contact resistance : 3 to 15 milliohms between

adjacent contacts.

Insulation resistance : 1,000 Megohms Min.

Dielectric strength : 750 VAC at sea level

Temperature range : -65°Cto+85°C

Finishes : All component parts requiring

plating are cadmium, nickel

or zinc plated and passivated

as per our standards.

Stops

Fixed stops at total number of positions specified are

standard. If OFF position is required, please indicate whether

it is to be at the first or last switch position.

Spring Return

Various combinations are available for returning switch to the

last-but-one position from the last position. Reliable spring

return action is possible only with switches having less than 3

wafers. The first spacing between index and first wafer (and

overall switch length behind front mounting surface) will

increase by about 6.00 mm to accommodate the spring return

mechanism.

Water Seal

'O' ring sealing is available for both shaft and index housing.

Water sealing meets JSS requirements.

Clip Terminals

Standard is 60 bend on terminals. Flat and reverse clips are

also available on request.

Printed circuit Terminals

Silver plated Brass PC. terminals are available assembled with

the switch clips (See figure for terminal details and drilling

pattern). Electrostatic shields, mounting brackets, etc. are

available as standard and can be supplied when specified.

Gold Flashing/Plating

Gold flashing or gold plating can be provided over silver alloy

when specified to improve storage characteristics, dry circuit

switching, increase reliability when used infrequently or in

corrosive atmospheres or limit contact resistance variation:

(See under military specifications for rating of switches to

JSS).