ADL5315: Precision Wide-Range (3 nA - 3 mA) High-Side Current Mirror Data Sheet (Rev. 0)0 pages

Precision Wide Range (3 nA to 3 mA)
High-Side Current Mirror
ADL5315
FEATURES
Accurately mirrors input current (1:1 ratio) over 6 decades
Linearity 1% from 3 nA to 3 mA
Stable mirror input voltage
Voltage held 1 V below supply using internal reference
or can be set externally
Adjustable input current limit
2.7 V to 8 V single-supply operation
Miniature 8-lead LFCSP (2 mm × 3 mm)

FUNCTIONAL BLOCK DIAGRAM
ADL5315
VOLTAGE
REFERENCE
4

CURRENT
LIMITING

COMM
20kΩ

3

RLIM
CURRENT
MIRROR
1:1

5

6

SREF

VPOS

VSET

NC

2

7

APPLICATIONS
IOUT

INPT
1

8

IPD

IPD

05694-001

Optical power monitoring from a single photodiode
General voltage biasing with precision current monitoring
Voltage-to-current conversion

Figure 1.

GENERAL DESCRIPTION
The ADL5315 is a wide input current range, precision high-side
current mirror featuring a stable and user-adjustable input
voltage. It is optimized for use with PIN photodiodes, but its
flexibility and wide operating range make it suitable for a broad
array of additional applications. Over the 3 nA to 3 mA range,
the current sourced from the INPT pin is accurately mirrored
with a 1:1 ratio and sourced from the IOUT output pin. In a
typical photodiode application, the output drives a currentinput logarithmic amplifier to produce a linear-in-dB output
representing the optical power incident upon the photodiode.
For linear voltage output, a single resistor to ground is all that is
required. The photodiode anode can be connected to a high
speed transimpedance amplifier for the extraction of the data
stream. The voltage at the INPT pin is temperature stable with
respect to the voltage at the VSET input pin, which it tracks. A
temperature stable reference voltage is provided at the SREF
pin, which, when tied to VSET, fixes the voltage at INPT 1.0 V
below VPOS. VSET can also be driven from an external source.

The VSET input has very low input current and can be driven
as low as the bottom rail, facilitating nonloading voltage-tocurrent conversion as well as minimizing dark current in
photodiode applications.
The ADL5315 also features adjustable input current limiting
using an external resistor from RLIM to VPOS. The maximum
current sourced by INPT (and IOUT) can be set between 1 mA
and 16 mA, beyond which the voltage at INPT falls rapidly
from its setpoint. Connecting RLIM directly to VPOS provides
basic input short-circuit protection with the default current
limit of 16 mA typical.
The ADL5315 is available in a 2 mm × 3 mm, 8-lead LFCSP and
is specified for operation from −40°C to +85°C.

Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
© 2005 Analog Devices, Inc. All rights reserved.