SCA1200 AUTOMATIC CARPENTER'S CLAMP FOR DRAWERS ASSEMBLY, A MACHINE ABLE TO MEET ANY KIND OF NEED0 pages

OMEC

Technical sheet

SCA1200 AUTOMATIC
CARPENTER'S CLAMP FOR
DRAWERS ASSEMBLY, A
MACHINE ABLE TO MEET
ANY KIND OF NEED
The OMEC SCA1200 carpenter's clamp was
designed to assemble furniture drawers.
The machine has been manufactured since 2003
and has been updated both in its mechanical and
software features in order to make it complete,
more functional and faster to operate.

Thanks to the recent updates, the following
programmes have been added to assemble a
wider range of drawers (see enclosed drawing).
Drawer 1
With this programme it is possible to assemble
most types of drawers, and specifically drawers
with dovetails on four blind sides, drawers with
pass-through joints, with dovetails on front-pieces
and dowels on the back-pieces.
Drawer 2
This programme is suitable to assemble drawers
with parallel joints.
The machine features a 3-axis CNC system that
allows for the automatic adjustment of the main
drawer’s sizes. It is also equipped with a vacuum
system that is controlled by a dry vacuum pump
which keeps the drawer’s bottom in position.
Four different types of suction cups are available
depending on the different drawer sizes, so as to
ensure the best locking of the drawer’s bottom in
all conditions.
Pressing is performed on all four sides and is
obtained by means of brushless motors. This
solution allows for a smooth and constant feed at
the max. available torque.
Reference stroke-pieces are provided in the form
of pneumatic units. They are automatically lifted
and lowered by the CNC system depending on
the machining programme that has been selected.
This way, it is possible to quickly remove the
pressed drawer.

Drawer 3
This programme is suitable to assemble
drawers having sides higher than the
bottom.
Drawer 4
This programme is suitable to assemble
drawers having the bottom whose depth
is less than the sides’ depth.
Drawer 5
This programme is suitable to assemble drawers
with dowels on sides.
Drawer 6
This programme is suitable to assemble drawers
with folding system, drawers with dowels on the
sides and on the back, drawers with dowels on
the sides and on the front-piece and drawers with
stroke-piece on the side.