PTT-Series0 pages

Torque
Analyzers
T
orqueMate
PTT Series
Torque, Angle & Force Analyzer
with ARCII Technology
KEY FEATURES
System Accuracy 0.5% of reading from 20% to 100% of full scale.
System Accuracy 1% of reading from 10% to 20% of full scale.
Operates with Torque & Force sensors.
Recommended for all hand screwdrivers, wrenches or power tools.
Provides EZ-Plug & Play with Mountz Transducers, Features ARCII
technology, an instant auto-recognition system of the transducer connected
to the PTT.
Selection of six/seven operation modes:
Track, Peak, First Peak, Audit, Bolt Audit*, Spindle Audit, Torque + Angle.
*The Bolt Audit Mode is an additional feature that is only
available with PTT Bold Audit Model (Item #072995).
Seven units of torque measurements:
ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm
Two units of force measurement: lbf and kN
Features built-in Tool Tests operation.
Includes three PC Windows based software programs:
Mountz Torque Meter Interface Program
for sensor calibrations, meter calibration and tool tests.
Torque Meter Bootloader
for updating the PTT operating systems.
Excell Add-In
for Real-Time data collection into an Excel spreadsheet.
It provides statistic calculations.
Flash memory allows upgrades to be done by the user in the field &
internet through the USB port.
Five low-pass filters: 3000, 2000, 1500, 500, and 200Hz
Six-digit display and easy to read menu structure.
Real Time Clock for time stamping of readings.
USB interface to download readings to PC.
High Capacity Li-ion Batteries for long life (30 hours with standard
transducers and 16 hours with brushless rotary).
Tool Tests & Graphing
Can connect to most mv/v transducers and can store calibration data
for up to 50 non-smart torque sensors.
The PTT allows you to set up and create
tool tests and save the readings so you
can export the data to a PC for
documentation. It is the ideal solution for
organizing and storing test data for ISO
and SPC documentation.
The 5VDC capability allows unit to be used with a Brushless Rotary
Transducer for testing pulse tools and high RPM tools.
Torque and Angle data is displayed simultaneiously when used with
Torque and Angle transducers, up to 8000 RPM for angle measurement.
The ability to graph a dynamic rundown
allows joint analysis. Great resource to
evaluate, create or confirm a torque
specification or tool being used in
production.
Stores a total of 5000 data points.
Real time graph of torque vs. time using associated PC Windows software.
Features Go / No Go LEDs that illuminate when high or low setting is
achieved.
CERTIFIED
Supplied with NIST-Traceable Certification of Calibration
PTT-2000 Item #072999
PTT-2000 Bolt Audit Model
ACCESSORIES
OPTIONAL
CABLE CHART
Transducer
NOTE!
Since a tester cannot always duplicate actual joint characteristics,
the torque reading displayed on the PTT may vary from the
actual torque that a tool will apply to a joint. When critical
assemblies are involved, the torque output of the power tool
being used should be verified on the actual assembly using a
calibrated measuring torque tool.
Description
Item #
ACCESSORIES INCLUDED
PLUG & PLAY
(for HSD Multipliers) - Item #072995
Charger 100 - 240VAC
USB Cable
Battery Pack
Multiplexer
Bar Code Reader
PLC Interface
770300
770319
072506
072998
072997
072014
Universal Charger (100 - 240VAC)
USB Cable
Mountz Software Progams
Protective Cover
Item #
RTSX-A
All BLRTSX Models
BMX
LPX
SDX
RTSX
ETX
072000
072001
072002
072003
072004
072005
072006
PTT
01.4