OPF5000 pages

(SOPTEK Product Bulletin OPF500 *V_>r® February 1996 200kbps Fiber Optic Receiver Type OPF500, OPF510 Series Features ٕ Interfaces with all logic circuits  Two output options Օ Optimized for fiber optic applications using 50 to 200 micron fiber  Data rate to 200kbps NRZ Օ Available with multiple packaging options De scrip tion The OPF500, OPF510 series receiver contains a monolithic integrated circuit which incorporates a photodiode, a linear amplifier, a voltage regulator, and a Schmitt trigger on a single silicon chip. These receivers are designed for short haul fiber optic systems using 850 nm LED's such as Optek's OPF300 series. These devices feature TTL\LSTTL compatible logic level output. An internal voltage regulator allows operation with supply voltages ranging from 4.5V to 16V. Absolute Maximum Ratings (Ta = 25o C unless otherwise noted) Supply Voltage................................................... 18 V Storage Temperature Range.............................. -65o C to +100" C Operating Temperature Range............................. -40o C to +85o C Lead Soldering Temperature [1/16 inch (1.6 mm) from case for5 sec. with soldering iron].......................................................... 240o C Power Dissipation.............................................. 200 mW Duration of Output Short to Vcc..................................... 1 sec. Voltage at Output.................................................. 30 V Sink ing Current.................................................. 16 mA Sche mat ics Buffer/10K PU Vcc OUT OGND oVcc rOOUT GND Inverter/10K PU Optek Technology, Inc. 1215 W.CrosbyRoad Carrollton, Texas 75006 (972) 323-2200 Fax (972) 323-2396 8-92