OP715 Benchtop Source0 pages

OP715
Stabilized Light Source
The OptoTest OP715 Benchtop LED/Laser Source can be
configured up to 4 channels with a mix of LED’s and/or Lasers.
This unit is ideal as a compact stand-alone source or used in
conjunction with an optical power meter to measure insertion
loss.
The LED Source offers controlled launch conditions to meet
specific CPR requirement or the more detailed IEC requirements.
This unit is offered with 62.5ìm fiber at 850nm or 1300nm
LEDs standard however other fiber sizes and industry-available
wavelengths are also readily available.
The stabilized Laser Source is with FP or DFB lasers for
standard wavelengths such as 635nm, 850nm, 1310nm, 1490nm,
1550nm, and 1625nm. Sources can be combined internally into
a single output port.
Stabilized Light Source
Single/Dual Channel LED Source
• Factory configurable wavelength mix
• Adjustable power level 0% to 100% either through front panel or USB port
• Controlled launch condition, customer specified.
• Dual wavelength operation with internal 1x2 precision optical switch.
• Support of most common connector options (FC, ST, SC, LC or others)
• Other fiber sizes available (0.2mm to 1mm)
Single/Dual Channel Laser Source
• Factory configurable wavelength mix including LED and Laser
• Adjustable power level up to +13dB depending on laser either through front panel or USB port.
• Cost effective solution with optional, internal, high repeatable built-in optical switch.
• Supports most common connector options (FC, ST, SC, LC, or others)
• Supports TEC cooled lasers
805.987.1700
sales@optotes t.com
engineering@optotes t.com
OptoTest Corp.
4750 Calle Quetzal
Camarillo,CA 93012
NEW
Features
NE W
Overview
Model OP715 Stabilized Light Source
OP715-LS-wwww/wwww OP715-LD-wwww/wwww
Detail Specifications
wwww=wavelength
Channels 1... 4
Source - Dual Channel Laser LED
Source Wavelength 1310nm, 1550nm1) 850nm, 1300nm1)
Output Power typ. 0dBm Typ. -15dBm
Source stability +/- 0.02 dB 12hours +/- 0.02 dB 12hours
Connector Options APC, PC
Internal Fiber 9um(SMF28) 62.5um
Power 80VAC to 250VAC (50Hz, 60Hz)
Mechanical Dimensions 8.5” x 3.5” x 12”
Specifications are subject to change, please confirm specific per formance characteristics of the product at the time of ordering.
All specifications are valid within temperature range of 18º C to 24º C unless otherwise noted.
1) Other wavelength and combinations available.