Gauge with Built-in Pressure Transmitter TR100 (Transpress 100)0 pages
Data sheet
Date
Page
TR100
04/2014
1 of 2
ALL ST/ST PRESSURE GAUGE WITH PRESURE TRANSMITTER
TRANSPRESS 100
TECHNICAL CHARACTERISTICS OF INDICATOR
Diameter: 100 mm
Case and ring: st. st. 304, bayonet type ring
Transparent: safety stratified glass basket in EPDM
Movement: st. st. reinforced
Dial: aluminium with black numerals on white
background
Pointer: black steel with micrometric adjustment
Blow out: neoprene, upper
Sensing element: Bourdon tube type, with “C” form for
pressure ≤60bar, helical wound for pressure ≥ 60bar
Sensing element material: AISI 316L
Connection material: AISI 316L
Welding: T.I.G.
Connection dimension: ½”NPTM or BSP
Mounting:
type A bottom connection, direct mounting
type D back connection, direct mounting
Ranges: see table at page 2
Overpressure:
+30% F.S. for range up to 60bar
+15% F.S. for ranges from 100 to 600bar
Accuracy: class 0,5% at 20°C ; class 1 for oil filled case
The pressure gauges series TRANSPRESS TR100
have been realized to be used on machine and
plants where is required the local indication of the
pressure and the remote transmission of a
normalized signal to record or control the process.
The instrument is made of 2 independent elements,
a Bourdon tube pressure gauge and a piezoresistive
sensor so the pressure value measured is always
reliable even when one of the sensors is out of
calibration
The wetted parts in AISI316L, are suitable for a wide
range of fluid. In case of application on incompatible
fluids, a wide range of chemical seal is available.
TECHNICAL CHARACTERISTICS OF TRANSMITTER
Output signal: 4/20mA 2 wires
Power supply: 8/24Vdc
Accuracy: ± 0,5% f.s including linearity, hysteresis,
repeatability
Working temperature: -10/+80°C
Compensated temperature range: 0/50°C
Global error: 1% typical, max 2% in the range 0/50°C
Shock: 20g sinusoidal, 11 m/sec
Insulation: ≥ 10Mohms
Load in Ohm: U- 8V ; 0,02 A
Electrical connection: DIN43650
OPTIONS AND ACCESSORIES
•
•
•
•
•
•
•
•
•
Case diameter 150mm
Intrinsically Safe version EExiaIICT4/T6
Mounting with diaphragm seal
Flush mounting back-flange
Front flange for panel mounting
Degreasing for use on Oxygen
Internal dampener (screw on the connection)
Electrical contacts
Mounting with diaphragm seal
HOW TO ORDER
Please specify: model, mounting, case diameter, range,
process connection, options if any
Example:TR100, A, 100mm, 0/400bar, ½”BSPM
_______________________________________________________________________________________________
PCI (Process System Solutions) Ltd, Unit 7 Slaidburn Crescent, Southport, Merseyside, PR9 9YF, UK,
Tel: +44 (0) 1704 509090, Fax: +44 (0) 1704 509091,
email: sales@pci-instruments.com, Website: www.pci-instruments.com
(Specifications are subject to change without notice)