ZMX+0 pages
CONTROL
ENG
www.phytron.eu/ZMXplus
ZMX+
Stepper motor power stage with ServiceBus
The ZMX+ is a plug-in stepper motor power
stage for 19“ sub-racks with ServiceBus for
motor currents up to 9 APEAK.
Due to improved design and greatly reduced
power dissipation, the ZMX+ provides reliable
high-precision performance with minimised
heat emission.
Parameters can be manually set by switches.
The ServiceBus interface allows several
additional adjustments.
In Focus
Application
The ZMX+ is used in different fields of application: e.g. in inspection and test applications, labelling or packaging machines, in
equipment manufacturing or in beamlines.
The ZMX+ version with a 32 pin VG connector
is pin compatible with commercially available
power stages. The optional ServiceBus connector is placed at the front.
Highlights
ServiceBus Instruction
ServiceBus
ServiceBus-Comm®
online setting of parameters
during operation via USB,
CAN, RS 485...
The royalty-free ServiceBus protocol with
its extensive command set allows direct
communication between phytron power
stages and the PC or controller connected
— even from a distance. That way not only
start, stop and boost current but also parameters like current delay time can be set
easily.
1/512 Microstep
Integrated Driver
precise power adjustment
and fine positioning up to
1/512 microstep
Electrical Isolation
El. Isolated
with and without electrical
isolation of the motor circuit
Our free Windows® software ServiceBusComm® allows to monitor and to adjust up
to 32 axes while providing a comfortable
and easy to use graphical interface.
ServiceBus Protocol
El. Isolated
• 19“ sub-rack power stage for bipolar
control of 2 phase stepper motors
• Up to 9 APEAK at 24 - 70 VDC
• Up to 1/512 microsteps
• Parametrising and diagnostic
online via ServiceBus — switches for
basic adjustment
• Options:
- 32/48 pin connector
- With/without electrical isolation
- With/without ServiceBus
Front panel fixing
Multi-colour
Status LED
Step resolution
Current range
ServiceBus on/off
+
Power Stage
Axis 1
via USB, RS 485...
+
Power Stage
Axis 2
+
Power Stage
Axis 3
ServiceBus connector
for communication
by PC/Host-μC
RS 485
Address (bus operation)
up to 32 Axis
Schematic Illustration of the ServiceBus Structure
Edition 2014 June
ServiceBus
Run current
Alternatively
PC
Customer Controller
e. g. ServiceBus-Comm Customer specific progr.
Integrated Driver
Front panel fixing
"