STAIRCASE INFO0 pages
I N FO
CNC-technology at its best
Your PLUS in production
This machine provides three additional routing mo-
B R I E F
Highly efficient
staircase
production
by
VISION-II-ST Sprint
tors for your staircase production. These units are
mounted to the Y-slide and connected to the cardanic head. Each routing motor moves downwards
individually and possesses collet chucks.
As a standard, in staircase production a motor (9.0
kW) is used for shaping the outer contours of strings
and steps. Another motor (6.7 kW) processes the
slots and grooves at the steps and strings. The
design of the third routing motor (6.7 kW) with in-
D E S C R I P T I O N
lt Machine table with 7 beams; table size 6,200 x 1,400 mm
lt 2 x jigs for steps
lt 12 x double-acting vacuum clamps
lt 3 x jigs for newel posts
lt 7 x vacuum clamps; 3 x supporting beams
ltSpeed:
t
X = 60 m/min; Y = 60 m/min.; Z = 20 m/min
lt Displacement: X = 6,140 mm; Y = 1,600 mm; Z = 480 mm
lt Gantry passage 400 mm
lt 5-axes working unit with a power of 15 kW; 500 – 24,000 rpm
tegrated height tracing (float-mounted) permits the
lt Clamping unit; HSK-F63
manufacture of high-precision profiles at steps and
lt 3 x individually movable routing motors; 2 x 6.7 kW, 1 x 9.0 kW
strings. This conception allows for the main pro-
lt Height measuring by tracing ring
cesses in staircase production to be attributed to
lt Automatic plate magazine for 24 tools
several routing spindles.
lt Chip removal belt
lt Vacuum pump of 160 m3
Thus, tool changing time is minimised. The utili-
lt Vacuum accumulator of 250 liters
sation of the main routing motor at the cardanic
lt Vacuum distribution for alternate feeding
working head is limited to horizontal and freeform
lt Movable extraction system Ø 400 mm
processes, as well as to sawing processes at the
lt Safety at the machine via bumper
steps. Moreover, the tool changing system is still
moving along the X-axis next to the main routing
lt Siemens control system type Sinumerik 840D sl
motor. Compared to other solutions, in staircase
in a movable control panel with 17” TFT-monitor
production this machine conception provides for a
including tele-diagnostics
savings potential of about 20 % in production time
lt Laser projector for positioning the vacuum pods and the
caused by a reduction in tool changing time.
(no pressure sensitive mats required)
VISION-II-ST Sprint
components on the machine table
Rosenauer Straße 32 · D-96487 Dörfles-Esbach
Phone: +49 (0)9561-599-0 · Fax: +49 (0)9561-599-199
info@reichenbacher.de · www.reichenbacher.com
03/ 13
Reichenbacher Hamuel GmbH
"