K400 AND S-PRO0 pages

NEWS 2014
K400

COMPLYING

WITH

EN

AVAILABLE FROM SEPTEMBER

• K400 is the new RIB operator for sliding gates
weighing up to 400Kg.
• It will be available with magnetic or electromechanical limit switches, but also in a special
version with integrated the RIB Wi-Fi system.

news that brings in a single electronic card
all the normal functions of management of a
gate automation but above all also the wireless
management of photocells, safety edges, flashing
etc., obviously without having to connect any
wire from the control panel to these accessories !

• In the control panel the memory of the remote
control codes can be removed to facilitate the
maintenance.
• The control panel can also be programmed
remotely via a programmer (ACG4672).

• This Wi-Fi system in particular, is a world-wide

FOR SLIDING GATES WEIGHING UP TO 500 kg
AA40905

K400

with magnetic limit switches and K 24V-CRX electronic control panel

AA40900

K400

with electro-mech. limit switches and K 24V-CRX electronic control panel

AA40925

K400 Wi-Fi with magnetic limit switches and K 24V-CRX Wi-Fi electronic control panel

AA40920

K400 Wi-Fi with electro-mech. limit switches and K 24V-CRX Wi-Fi elec. control panel

ACG4667

BATTERY CHARGER for K400

ACG4672

K 24V PROGRAMMER and RX S-PRO

S-PRO

THE REMOTE CONTROL THAT CANNOT BE COPIED ! AVAILABLE FROM SEPTEMBER

• 200 bits rolling code Remote Control.

handle up to 800 remote controls.

the radio receiver.

• RIB is the owner of the algorithm and it cannot
be duplicated.

• The codes in the remote controls can be inducted
by using the Programmer (ACG4662).

• Through the Programmer (ACG4662) the radio
receiver can be installer’s loyal.

• The procedures for creating a code and for
cloning are identical to the standard remote
controls.

• The S-PRO allows you to store the codes of each
installation on a SD-CARD and in your PC.

• The possibility of sending a replacement remote
control that can automatically disable the lost one
without the need to intervene on the installation
by the installer or end user.

• They use dedicated radio receivers that can

• Through the Programmer (ACG4662) one can
remotely make the maintenance of the codes in

ACG6210 S-PRO 2CH
2-channel Transmitter
433,92 MHz
BATCH OF 24 PIECES

BATCH OF 24 PIECES

ACG6220 S-PRO CLONE 2CH
2-channel Transmitter
433,92 MHz
6

ACG6214 S-PRO 4CH
4-channel Transmitter
433,92 MHz

ACG6224 S-PRO CLONE 4CH
4-channel Transmitter
433,92 MHz

BATCH OF 24 PIECES

BATCH OF 24 PIECES