BAND HEATERS WITH CERAMIC INSULATION0 pages
RISCALDATORI A FASCIA
IN CERAMICA
5
RISCALDATORI A FASCIA IN CERAMICA
Costituiti da una spirale in NiCr 80/20 alloggiata in
elementi modulari in steatite. Il Carter esterno è in lamiera
ALUSI o in acciaio inox.
Sono adatti a temperature di funzionamento fino a 600°C
e supportano carichi specifici fino a 8 W/cm2.
Al fine di limitare la temperatura del carter esterno e di
orientare il flusso termico verso la superficie da scaldare,
la fascia è schermata con uno spessore isolante in fibra
ceramica.
BAND HEATERS WITH CERAMIC INSULATION
Made from a NiCr 80/20 spiral insulated on steatite
cares; the external casing is made from either aluminated
sheet or stainless steel.
The band heaters are suitable for operating temperatures
up to 600°C and capable of withstanding specific power
up to 8 W/cm2. In order to reduce the temperature of the
external case and to direct the thermal flow towards the
application surface, the band heater is shielded on the
outside with a ceramic insulator.
CARATTERISTICHE / TECHNICAL FEATURES
APPLICAZIONI / APPLICATIONS
Queste resistenze sono prevalentemente impiegate nel
settore delle materie plastiche per il riscaldamento di
presse ad iniezione, estrusori e soffiatrici.
Ceramic band heaters are mainly used in the plastics
industry for heating of injection moulding machines,
extruders and blowing machinery.
Meccaniche/ Mechanical Specifications
Diametro/ Diameter
Larghezza/ Width
Min. 50 mm
Max 500 mm
(per diametri superiori ai 500 mm esecuzioni a SETTORI)
(for diameters over 500 mm ASSEMBLING executions)
Min. 30 mm
Max correlata al diametro richiesto / Max width depends on the required diameter
Circa 12 mm (9 mm di nucleo e 3 mm di isolante) / About 12 mm (9 mm of core and 3 mm of insulation)
Luce/ Clearance
Le fasce prevederanno, una volta serrate, una luce standard di ca. 5 mm. È consigliato l’utilizzo di
una chiave dinamometrica per fissare le viti a 7-8 Nm
The bands, once tightened, allow a standard clearance of about 5 mm. The use of a
dynanometric wrench is suggested for fixing the screws at 7-8 Nm
Elettriche/ Electrical Specifications
Tensione/ Voltage
Da 12 a 500V (possibilità di alimentazione trifase con predisposizione per collegamenti a stella o a triangolo)
From 12 to 500V (with the possibility of using a triple pole voltage supply and combining it to a star or delta connection)
Potenza/ Output
Carichi specifici fino a 7-8 W/cm2 per particolari condizioni. Tolleranza standard secondo norme VDE
a +5% -10%
Specific power up to 7-8 W/cm2 in particular conditions. Standard tolerance in accordance with the VDE norm
at +5% -10%
Ampere-fase/
Ampere per phase
Fino a 40A per alimentazione secondo i diversi tipi di connessione
Up to 40A for each supply depending upon the various types of used connections
PLASTICS
Spessore/ Thickness
11