Level_indicato_IEG-INOX-FD-SA_Riels0 pages

IEG-INOX-FD-SA

LEVEL INDICATORS
WITH 1 CONTACT

LEVEL

Electromagnetic level indicators
with one contact

USE:
Entirely in stainless steel, they are suitable for use in the production processes of chemical, pharmaceutical and food industries.
Suitable for solvents, thinners and all liquids compatible with stainless steel.

Tutti i dati ed i contenuti di questa scheda sono di proprietà esclusiva di Riels Instruments

OPERATION:
When the float of the indicator encounters the Reed switch incorporated
in the tube at the pre-established distances, the contact activated by the
magnet housed in the float opens or closes, thus obtaining the possibility
of sending a luminous or acoustic signal or disconnecting any electrical
equipment connected to it.
FITTING:
The indicator must be fitted in the vertical position, and the float must be
at least 35mm from ferrous surfaces (walls, tanks, etc.).
IMPORTANT:
To invert the contact from N.C. to N.O. just remove the bottom stop and
turn the float upside down.

Model
- IEG - INOX- FDSA 611 DA 03 stainless steel AISI 316
- IEG - INOX- FDSA 011 DA 03 stainless steel AISI 304

Electrical characteristics
- Connection: 1/8" Gas
- Electrical contacts: SPST
- Power commutable in d.c. : 50 W
- Current strenght in a.c : 0,5 A
- Protection: IP65
- Cable lenght: 300 mm (Longer on request)
- Temperature: -10+120°C
- Max.pressure 10 bar
- Commutable voltage:
IEG - INOX- FDSA 611 DA 03: 200Vdc
IEG - INOX- FDSA 011 DA 03: 240Vdc

Riels Instruments Srl

+39 049 8961771

+39 049 717368 www.riels.it info@riels.it