ARMAK Gas Pressure Motor GGP16XA0 pages

Armak Gas Pressure Motor i^\j^€n^ft.

GGP16XA as Generator Drive ^/MOTOR EN

Armak Gas Pressure Motors are designed to drive

electric generators. GGP Gas Pressure Motors are driven

by non corrosive gaseous media at temperatures below

150°C, with pressures up to 15 bar.

Technical details and product advantages:

• frictionless torque producing motor parts

resulting in long and maintenance free lifetime

• completely enclosed motor casing

without leakage

• compact design and freedom of installation

• metric flange + shaft

The torque is developed by one rotating piston (in the picture the one the left), which is

part of the output shaft. The sealing rotor is running without physical contact and with an

extremely small gap for high motor efficiency.

This frictionless operation results in a long

maintenance free operation without downtime.

The applications for Armak Gas Pressure Motors are ORC-Systems. Heat sources

like for example Solar Technology (collectors / mirrors) or Combined Heating and Power

Systems (exhaust of the combustion engines) are fed into a heat exchanger. A suitable

fluid is inserted and vaporised. Pressurised gas up to 15 bar can be produced and

delivered to an Armak motor which in turn drives a generator to create electric power.

Or can supply the ORC key components, the fluid metering pump and the gas pressure

motor.

Armak Gas Pressure Motors must be ajusted to the pressure fluid (vapour) used

as some media attack and destroy bearings and seals.

Technical Data

Gas Pressure Motor GGP16XA

Armak GmbH - Motoren Fon +49 7154 82400 www.armak-motor.de

Enzstr.39 D-70806 Kornwestheim Fax +49 7154 824080 info@armak-motor.de

GeschaftsfuhrerWolf Krisch HRB 207012 Stuttgart ID-Nr DE814130032

Blatt 1 VOn 3 a6204 GGP16XAdat-1420e