عضویت 
ورود اعضا
راهنمای خرید
Elite SM0 pages
GENERAL SPECIFICATIONS / ALL MODELS OF ELITE SM
BOOMS
•t PU-40 Power unit includes a 40 hp electric
motor, an electric panel, a cut-off switch,
a double gear pump, a thermostatic oil
cooler, a 44 US gallon oil tank, a support
structure and hood.
•t 1000 watt anti-freeze immersed heater
with thermostat on PU-40 oil tank.
•t Continuous rotation through a 12 port
hydraulic swivel and a 5 section electric
swivel.
•t 50 feet extension cable from joysticks to
Danfoss control valve.
•t 50 feet extension cable for emergency cutoff switch and lights.
•t 40 feet extension cable to connect loader
valves and accessories to PU-40.
•t An operator station mounted on the turret and including the operator seat, the
hydraulic control valve assembly mounted
under the operator’s seat, 2 mechanical joysticks mounted on the valves. The operator
station is ready to receive an optional cab.
32 1/4”
36” dia.
ELITE SM • R
47”
•t PU-40 Power unit includes a 40 hp electric
motor, an electric panel, a cut-off switch, a
double gear pump, a thermostatic oil cooler,
a 44 US gallon oil tank, a support structure
and hood. A secondary start/stop/accessories control box installed in the operator
station is also included.
•t 1000 watt anti-freeze immersed heater
with thermostat on PU-40 oil tank.
•t Continuous rotation through an 8 port hydraulic swivel and a 5 section electric swivel.
Optional
42”
28 7/8”
OPTIONAL EQUIPMENT
Turning radius 60 1/2”
36” dia.
ELITE SM • H
“X” FEATURES / CONFIGURATION
CYLINDERS
-tRotobec built hydraulic cylinders, with bolt-on head,
wear ring, and chrome plated tempered steel rod
bore 5”t
rod 3”t
bore 5” t
rod 2.5”t
(127 mm)t
(76,2 mm)
(127 mm) t
(63.5 mm)
WEIGHT
-tDiffers from each model
ATTACHMENT
STRUCTURE
-tAttachment choice varies on application
- 18” Pedestal column
OPTIONS
HYDRAULIC SYSTEM
-tBoom reach
t With M25t
t
25’ t
(6.62 m)
t With MT26t
t tt Reach when extended:t
25’6” t (7.77m)
t tt Reach when retracted:t
22’ t
(6.72 m)
t With MT27t
t tt Reach when extended: t 27’ t
(8.23m)
t tt Reach when retracted: t 23’6” t (7.16 m)
- Telescopic stick boom, activated by electric switch
t on joystick
-tAnchor kit
-t42” Pedestal riser
-tAdjustable swing lock to set swing angle
-tBooms and attachment controlled by joysticks (for
details on joysticks, valves and pumps, refer to
t specific model features/configuration
-tOperating pressure 3000 psi
-tRequires a double pump of 19.9/19.9 US gpm
t (75/75 lmp) at motor rpm
-tStandard heavy-duty spring loaded hydraulic
accumulator protects the structure
SWING SYSTEM
-tPowerful 345° limited rotation is standard
-tContinuous rotation is optional on most configurations
-t26.45” (672 mm) outside diameter slewing ring
-tRotation speed of 9.5 rpm with 19.9 US gpm
ADDITIONAL TECHNICAL INFORMATION
-tOverturning moment: 150000 ft.lb
ACCESSORIES
- Refer to each specific model
ROTOBEC ELITE SM 22 FEET RANGE/LIFT DIAGRAM
Approximate lift capacity in pounds (less attachment)
Accumulator
•t Heavy-duty spring loaded hydraulic accumulator
t reliably protects the loader structure.
“SD” FEATURES / CONFIGURATION
Stationary loader with operator station and power unit on turret
•t Insulated cab (38” x 52”) with wiper, fan,
roof light and 2 lights towards the front.
•t 4000 watts electric heater with thermostat
and fan (not available with continuous t
rotation option).
•t Air conditioning (not available with continuous rotation option).
•t Cab front windshield protective grid.
•t Radio AM/FM/CD.
•t 50 feet extension cable for PU-40 and
loader without continuous rotation. Connects PU-40 to the loader to feed cab and
loader electric accessories.
•t 50 feet extension cable for PU-40 and
loader with continuous rotation option.
Connects PU-40 to the loader to feed cab
and loader electric accessories. Also includes wires connecting the start/stop
buttons to the PU-40.
-tMain boom:t
tt
-tStick boom:t
tt
DISTANCE ABOVE AND BELOW GROUND LEVEL IN FEET
Turning radius 29 1/2”
86 3/4”
OPTIONAL EQUIPMENT
STANDARD EQUIPMENT & ACCESSORIES
•t Electric junction box and a Danfoss t
(12 Volts) electric-over hydraulic proportional control valve assembly are factory
installed at the base of the loader and protected by a hood.
•t Two electric joysticks and a safety cut-off
switch are supplied to be dealer installed
inside a remote operator station.
•t Two 50 feet electric cables to connect the
joysticks to the Danfoss control valves are
also supplied.
Optional
42”
Stationary loader with operator station but no power unit on turret
STANDARD EQUIPMENT & ACCESSORIES
50 ft. standard
100 ft. optional
“H” FEATURES / CONFIGURATION
Stationary loader for remote operation
47”
“R” FEATURES / CONFIGURATION
-tStandard boom reach: t
22’t
(6.72 m)
-tMain boom length: t
148” t
(3759 m)
-tStick boom length: t
122” t
(3099 mm)
-tMain boom structure:t
rectangular 6” X 8” t
tt
(152 mm X 203 mm) t
tt
high tensile steel
-tStick boom structure: t
rectangular 6” X 6”
t tt
(152 mm X 152 mm) t
tt
high tensile steel
-tBooms design for closer access to the loader pedestal
-tTwo 55 Watt halogen work lights; one on each side of the
stick boom
-tBoom pivot points:t
2” (50.8 mm) diameter t
tt
induction tempered and tt
tt
chromed steel pins t
tt
mounted on bronze t
t
tt
bushings
-tComplete main boom cycle:t
t tt
8.2 sec. with 19.9 gpm t
tt
(75 lpm)
-tComplet stick boom cycle:t 6.5 sec. with 19.9 gpm t
tt
(75 lpm)
Stationary loader for very short distance remote operation
•t An operator station is supplied for dealer
installation within 15 feet from the loader.
It includes the operator seat, the hydraulic
control valve assembly mounted under the
operator’s seat and 2 mechanical joysticks
mounted on the valves.
•t PU-40 Power unit includes a 40 hp electric
motor, an electric panel, a cut-off switch,
a double gear pump, a thermostatic oil
cooler, a 44 US gallon oil tank, a support
structure and hood.
•t 1000 watt anti-freeze immersed heater
with thermostat on PU-40 oil tank.
28 7/8”
Optional
42”
17”
Turning radius 75 1/4”
36” dia.
Optional
42”
•t 1000 watt anti-freeze immersed heatert
with thermostat on PU-40 oil tank.
•t Continuous rotation through a high capacity sealed and insulated 4 section electric
swivel.
•t Insulated cab (38” x 52”) with wiper, fan,
roof light and 2 lights towards the front.
•t 4000 watts electric heater with thermostat
and fan.
•t Air conditioning.
•t Cab front windshield protective grid.
•t Radio AM/FM/CD.
37 3/8”
•t PU-40 power unit includes a 40 hp electric
motor, an electric panel, a cut-off switch, t
a double gear pump, a thermostatic oil cooler, t
a 44 US gallon oil tank, a support structure t
and hood, non continuous rotation limited to 345 degrees, an operator station
mounted on the turret and including the
operator seat, the hydraulic control valve
assembly mounted under the operator’s
seat, 2 mechanical joysticks mounted
on the valves and start/stop/accessories
switches mounted close to the operator. t
The operator station is ready to receive an
optional cab.
47”
OPTIONAL EQUIPMENT
47”
STANDARD EQUIPMENT & ACCESSORIES
86 3/4”
OPTION]AL EQUIPMENT
59”
STANDARD EQUIPMENT & ACCESSORIES
1
ACCUMULATOR
DISTANCE FROM CENTERLINE OF ROTATION IN FEET
27 3/4”
36” dia.
32 1/4”
MAXIMUM MAIN BOOM LIFT CAPACITY
REACH (FT)
Turning radius 29 1/2”
20 ft. Max.
CAPACITY (LB)
ELAVATION FROM
GROUND (FT)
8
10
15
20
10900
8800
5900
4400
1
1
2
7
* Capacity limited by stick boom.
ELITE SM • X
ELITE SM • SD
Standard Range/Lift Diagram • ELITE SM M22
"
