SU112-TOUCH0 pages
motion control technologies
nnnnan | [ecD |
motion control technologies |
SU112-TOUCH
nnnnMultiAxis Controller with included PLC, up to 5 Axis, 48 digital in, 48 digital out,
nnnnLCD color with touch screen feature and 40 keys membrane keyboard
nnnnSU112-TOUCH is the low cost Axis Controller with included
nnnnPLC made by Arteco Motion Tech.
nnnnMinimum configuration: 2 interpolated axis with included
nnnnsensors, 16 in, 16 out, 2 analog input and 1 serial port
nnnnRS232/485.
nnnnThanks to the slots located in the back side of the multiaxis
nnnncontroller, SU112-TOUCH can be configurated depending on the
nnnnuser's needs. There are 4 slots available. Each slot can receive
nnnnthe available expansions boards as the 8 digital input + 8 digital
nnnnoutput, the 1 axis expansion, 2 axis expansion, the 8 digital
nnnninput + 8 digital output + canbus port.
nnnnSo, the maximum configuration can reach 5 interpolated axis
nnnnwith included sensors, 32 in, 32 out, 2 analog input, 2 serial
nnnnports RS232/485, 1 CANbus port to connect the controller to
nnnnother Axis and I/O expansion modules for distributed I/O and
nnnnAxis.
nnnnEach state of the I/O is shown by LEDs located near each
nnnnterminal block.
nnnnSU112-TOUCH provides the color LCD 5,7" display 320x240
nnnnpixels and a resistive touch screen. The display, the touch
nnnnscreen and the keyboard can be programmed using the
nnnnimplemented functions and instructions of the PLC.
nnnnA rich set of graphics and text commands allows the user to
nnnnmake his HMI, 100% according to his needs.
nnnnSU112-TOUCH can be controlled using a rich set of Motion
nnnnControl Functions: Simple positioning, Linear interpolation,
nnnnElectronic cam, Boolean cam, Optimized trajectories generating
nnnnstarting from a points series, Rotative Axis, Control of Pick and
nnnnPlace machines, Circular interpolation, Self-learning and its
nnnnexecution.
nnnnOther important features: remote programming like debug,
nnnnservice and upgrade using the low cost WEB interface, built in
nnnnmodbus RTU protocol for connecting the Axis controller to
nnnnSCADA and other common HMIs.
nnnnm | \ \ \ \ ITKY \ | |
/ / / / 1 1 |