Injection mortar FIS PM 360S0 pages
The injection system for variable and efficient fixing.
BUILDING MATERIALS0
Chemical fixings
Injection mortar FIS PM 360S
APPROVALS
Approved for:
▪ Concrete C.20/25 – C50/60,
cracked and non-cracked
Also suitable for:
▪ Natural stone with dense structure
ADVANTAGES
APPLICATIONS
FUNCTIONING
▪ The variability in the anchorage
depth and building component
thickness enables optimal
dimensioning for economic
anchorage.
▪ Allowed in hammer- and diamonddrilled drill holes for maximum safety
in planning and processing.
▪ With just three power sleeve
dimensions and the fischer FIS A
threaded rods, an entire
M10/M12/M16 assortment can be
covered with the lowest inventory
cost.
▪ Savings in assembly time through
the special mortar which is
permitted for water-filled drill holes.
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪ The Powerbond System consists of
the injection mortar FIS PM based
on styrene-free vinyl ester, the
stainless steel sleeve Power Sleeve
FIS PS and the threaded rod FIS A.
▪ Powerbond is suitable for prepositioned and push-through
installation.
▪ The sleeve FIS PS is placed in the
drill hole and filled bubble-free with
injection mortar FIS PM from the drill
hole base.
▪ The threaded rod is set manually, by
lightly rotating it until it reaches the
drill hole base.
▪ The mortar fully bonds the sleeve
and threaded rod with the drill hole
wall and seals the drill hole.
http://www.fischerwerke.de/en/ - 16/07/2012
Guard rails
Consoles
Steel consoles
Timber construction
High rack warehouse
Silos
Conveyor belt
Signs and signal installation
Machines
1