Sizing Data on Scrubbers0 pages

Bulletin 7S Supp.

Sizing Data - Ejector Venturi Gas Scrubbers
• Type 7010 Scrubbers
• Type 7014 Scrubber/Separator Systems
INTRODUCTION

SPECIFIC GRAVITY CONVERSION

The capacity tables in this brochure permit the user to
size a Type 7010 or Type 7014 Ejector-Venturi Scrubber
System to meet specific volume requirements (consult
Bulletin 7S for a complete description of these
scrubbers). The scrubbers covered by this booklet
include 3" through 60" Type 7010 Scrubbers and 3"
through 12" Type 7014 Scrubber/Separator Systems. Of
course, a number of other variables must be considered
before specifying a scrubber for a particular application.
To obtain a detailed recommendation and price quotation
on an ejector-venturi scrubbing system, submit your
requirements on our Scrubber Application Data Form and
send it to your local S&K representative or the factory.

All capacity tables in this booklet are based on using
water (specific gravity 1.00) as the motive liquid. If a
liquid other than water is to be used, its specific gravity
must be multiplied by the motive liquid pressures shown
in the tables (20, 40, 60, 80 or 100 psig). The resulting
number is the actual operating pressure required to
obtain the results shown by the table at the various liquid
pressures and rates.

Data on larger and/or specially constructed units can be
furnished on request.

SCRUBBING
LIQUID
Graph 1. Particulate Removal Efficiency Type 7014 Systems*
99.6

CONTAMINATED
GAS

Efficiency (Percent)

99.4
99.2
99.0

98
96
94
92
90

CLEAN
GAS

80
60
40
20
0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

Particle Size, Microns

*Curve represents efficiency range of typical sizes of Type 7014 Scrubber/Separator
systems. Efficiency is also dependent on scrubbing liquid pressure at the scrubber nozzle,
grain loading of the inlet gas and true density.

LIQUID DRAIN

Schutte & Koerting • 2510 Metropolitan Drive • Trevose, PA 19053 • USA • tel: (215) 639-0900 • fax: (215) 639-1597 • www.s-k.com • sales@s-k.com

1