Molded Chip Wirewound Inductors NIN series0 pages

Molded Chip Wirewound Inductors

NIN Series

FEATURES
•
•
•
•
•

EIA SIZES A (1210), B (1812), C (1008) AND D (0805)
EXCELLENT HIGH Q AND HIGH SRF CHARACTERISTICS
BOTH FLOW AND REFLOW SOLDERING APPLICABLE
HIGH INDUCTANCE AVAILABLE IN SMALL SIZE
EMBOSSED PLASTIC TAPE PACKAGE FOR AUTOMATIC PICK-PLACE

AVAILABLE TYPE AND RANGE
Inductance
Style
Range
0805
D
2.0 x 1.25 x 1.25
NIN-ND
Standard
10nH ~ 1.0μH
NIN-FC
0.22 ~ 100μH
Standard
1008
C
2.5 x 2.0 x 1.6
NIN-NC
10nH ~ 0.82μH
High Frequency
NIN-PC
1.0 ~ 33μH
High Curret
NIN-FA
0.22 ~ 220μH
Standard
1210
A
3.2 x 2.5 x 2.2
NIN-NA
47nH ~ 8.2μH
High Frequency
NIN-PA
High Current
1.0 ~ 330μH
NIN-FB
Standard
0.1 ~ 1000μH
1812
B
4.5 x 3.2 x 3.2
NIN-PB
High Current
1.0 ~ 680μH
Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.
EIA Size

Size Code

Size (L x W x H mm)

NIC Type

SPECIFICATIONS
Specications
Inductance Range
Inductance Tolerance
Operating Temperature Range
Insulation Resistance
Withstanding Voltage
Q Factor, Self Resonant Frequency,
DC Resistance, Rated DC Current
and Inductance Tolerance

Case Size
1008
1210
1812
10nH ~ 100μH
47nH ~ 330μH
0.10μH ~ 1000μH
±20% (M), ±10% (K), ±5% (J)
±10% (K), ±5% (J)
-25°C ~ +85°C (at 100% of rated voltage)
1,000 MegOhm Min. (@ 100Vdc, Termination to Case)
250Vdc for 1 minute (Termination to Case)

0805
10nH ~ 1.0μH
±10% (K), ±5% (J)

See Individual Product Listings

ENVIRONMENTAL CHARACTERISTICS
Test
Solderability
Humidity
Soldering Effect
Low Frequency Vibration
Thermal Shock
Low Temperature Storage
High Temperature Load
Life
Humidity Load Life

Specication
90% Min. Coverage
(1) No Evidence of Damage
(2) Inductance Shall Be Within
±5% of Initial Value
(3) Q Factor Shall Be Within
±10% of Initial Value
(1) No Evidence of Damage
(2) Inductance Shall Be Within
±10% of Initial Value
(3) Q Factor Shall Be Within
±10% of Initial Value

Test Method & Condition
After 3 Sec. Dip in +230°C Solder Pot (Post Flux)
After 500 Hrs at +60°C and 90~95% RH
After 5 Sec. at +260°C (5 min. 120°C Pre-Heat)
After 2 Hrs per Axis, 10 ~ 55Hz, 1.5mm Amplitude
After 100 Cycles (-40°C ~ +85°C) 30 Min. Each
After 500 Hrs at -40°C
After 500 Hrs. at +85°C with Rated DC Current
After 500 Hrs at +60°C with 90~95% RH
at Rated DC Current

®

NIC COMPONENTS CORP. www.niccomp.com

www.lowESR.com

www.RFpassives.com

Specications are subject to change

www.SMTmagnetics.com

1