Xebec Diamond0 pages
L XEBEC Diamond Lineup A
nnnn1. Stick type
nnnnGrit (color) | Dimensions (mm) | Code No. |
#200 | 1 X 4 X100 | DM1004M |
1 X 6 X100 | DM1006M | |
(black) | 1 X10X100 | DM1010M |
1 X 4 X100 | DF1004M | |
#400 (bluegreen) | 1 X 6 X100 | DF1006M |
1 X10X100 | DF1010M |
#800 (gray) | 1 X 4 X100 | DS1004M |
1 X 6X100 | DS1006M | |
1 X10X100 | DS1010M |
2. Rod type
nnnnGrit (color) | Dimensions(mm) | Code No. |
#400 (bluegreen) | ^3X 50 | PDF30S |
^3X100 | PDF30M |
• Usage
nnnn♦ Ideal for polishing extremely hard die and mold
nnnn(especially materials harder than HRC57).
nnnn♦Usage can be specified for:
nnnno Surface polishing
nnnn0 Finishing ribs after EDM
nnnno Finishing gates after EDM
nnnno Finishing and deburring in corners
nnnno Finishing and deburring in edges
nnnno Chamfering corners
nnnn(to be rounded or chamfered)
nnnn(§>For the Most Efficient Use...
nnnn♦Coolant
nnnno The XEBEC Diamond can be used either dry or wet.
nnnno Coolant will increase efficiency.
nnnn♦Forming (Shaping the tip of a tool in accordance with the shape of a workpiece.) / Dressing
nnnn<Stick type>
nnnno For easy and perfect forming / dressing, use an electrodeposited diamond stone. Do cutting
nnnnsame way.
nnnn<Rod type>
nnnno For easy and perfect forming / dressing, press a tool rotating in a hand grinder onto an
nnnnelectrodeposited diamond stone. Do cutting same way.
nnnnPrecautions in use:
nnnn♦When Using with an ultrasonic tool
nnnno Please check the appropriate output. The tool may break or generate heat when the output is too large.
nnnno Please check the appropriate length. On an inappropriate length, the tool may not oscillate, or concentrated
nnnnoutput may result in heat generation.
nnnnoA bad clamp may concentrate output, resulting in heat generation.
nnnno Polishing capabilities may vary depending on the structure and method of the clamp in use; please read
nnnncarefully the instructions of your supersonic tool.
nnnn♦When Using with a hand grinder
nnnnc Ptease use below the maximum 30,000rpm.
nnnn0 Please use below 50mm full length. (If full length is more than 50mm, make sure to cut it below 50mm.)
nnnn♦Others
nnnno Please wear protective eyeglasses, gloves and mask during use.
nnnn/l\ Warning Please always follow the above instruction
nnnn/ • \ ■*9rmng ancj precautions in order to use the tools s
nnnnsafely.
nnnnliillili
nnnntp://www.xebec-tech.
nnnnXEBEC
nnnnXEBEC TECHNOLOGY CO.,LTD.
nnnnHead Office 4-3-3 Koujimachi, Chiyoda-ku, Tokyo, Japan
nnnnPhone.+81-3-3239-3481 FAX.+81-3-5211-8964
nnnnURL http://www.xebec-tech.co.jp
nnnnE-mail info@xebec-tech.co.jp
nnnnyour order:
nnnnFactory and R/D
nnnn4061-1 Minami-Minowa-mura, Kamiina-gun, Nagano, Japan
nnnnPhone.+81 -265-73-1523 FAX.+81 -265-73-0375
"